Get matched with top locksmiths in South Point, OH

If your door handle turns without opening, the most likely culprit is a loose or stripped spindle. This part connects the handles to the latch mechanism, and when it’s not properly engaged, turning the handle does nothing. Other issues might include a broken latch, loose screws, or even something small blocking an inner mechanism. In any case, it’s usually a matter of tightening, adjusting, or replacing a worn-out part inside the handle assembly—or calling in a professional to do it for you.

You can cut a door knob off using a sawzall, but you risk causing additional damage to the door itself. You’ll also need to completely replace the door knob, costing you extra money and another trip to the hardware store.

If part of the key is protruding out of the lock, you can use a pair of needle-nosed pliers or tweezers to gently turn the key in the lock to open the door. If the key is fully inserted into the lock, you may also be able to use a key extractor to help turn the key into the unlocked position. 

But if the key breaks off halfway into the lock or you simply can’t reach it to help engage the unlocking mechanisms, you should probably call a professional.

The good news is that, yes, you can change locks yourself. Many people find it’s an easy DIY project that requires few tools and not much expense (depending on which lock you’re installing). If you have trouble with any part of an installation, you can always call a locksmith to help finish installing them.