Get matched with top locksmiths in Raceland, KY

Lock bumping is a technique locksmiths use to quickly and quietly open a pin tumbler lock, typically found in most types of deadbolts. It involves inserting a specially crafted key, or bump key, into the lock and tapping or "bumping" it with a mallet or similar tool. The force applied causes the lock's pins to jump momentarily, allowing the lock to be turned and opened. Unfortunately, thieves also use this technique to break into homes. Luckily, products like a deadbolt strap will fortify your lock.

Typically, it can take around 15 minutes to rekey a lock. The time depends on the type of lock and how skilled you are at rekeying. The first time you rekey a lock, it may take a little longer. Once you get the hang of the process, it will move along much more quickly.

When you take a key to a hardware store or a locksmith for copying, you can expect the key-cutting process to take as little as 30 seconds. The key copier will review your current key to decide on the correct blank. Then, your original key and the blank are inserted into a key duplication machine to cut an exact key copy. When it’s all said and done, you can have a new key in your hand in just a couple of minutes.

You may be able to get a broken key out of a lock by yourself, depending on the situation. If a portion of the key is still protruding from your lock, try lubricating the keyway and using pliers or even a bobby pin to pull the key out of the hole. If you have jigsaw blades handy, you can also try using those to grab onto the stuck key and pull it out. 

But, if neither option works or you can’t reach the key, your only option is to call a locksmith for help.