Get matched with top tv mount installation pros in Monroe, OH

It’s highly recommended to use studs for a TV mount. The last thing you want is to be watching your favorite show when the TV falls off the wall. Studs are much stronger than drywall and quite a bit stronger than drywall anchors but, if you can’t find the studs or there simply aren’t any where you need them, you can use drywall anchors. It’s extremely important to make sure the anchors are rated for the load of the TV. We recommend using anchors that are rated far beyond the weight of whatever you’re hanging. Our suggestion is metal drywall toggle anchors. 

You will be placing holes in the wall to hang the mounting bracket. If you’re mounting a large TV, the bolts in use could make significant holes around half an inch in diameter. Other than a few holes, though, the process of mounting the TV should not cause significant damage to the wall, unless you make an error and miss the wall stud, tearing out drywall. Should you decide to remove the mount later, the DIY drywall repair cost for a small hole usually is $10 to $30. It’s a repair you can do in a few minutes.

Yes, drywall can hold a 50-pound TV. However, when mounting a TV, you’ll either need to attach it to wall studs or use drywall anchors. If you use anchors, make sure to buy a type that can hold at least 50 pounds. Molly bolts, threaded anchors, and toggle bolts are all good options. For extra support, you can also install a wall mounting plate with the anchors.

Yes, you can mount a TV on a brick wall as a DIY project. This process requires specific tools, such as a masonry drill and masonry bits, as a regular power drill is not sufficient for drilling into dense surfaces like brick. You will need to drill mounting holes directly into the bricks, not the mortar, to ensure there is enough support for the weight of the TV and its bracket. After drilling, use large plastic wall anchors or concrete screws to securely attach the TV mount.