We are a service disabled veteran owned business serving Jefferson County! We pride ourselves on our extreme professionalism and attention to detail. Our customer satisfaction guarantee will assure you we will not leave your property until you are completely satisfied with our work. As a locally owned and operated business you can trust that we will treat your home as we would treat our own. Give us a call today, and we look forward to working with you!
"It is with deep satisfaction that I recommend Grady?s Painting and Plastering & Construction. Mr. George Grady is a skilled craftsman. He was hired to correct long neglected and extensive masonry and window issues on a large, beautiful Presbyterian Church built in the Civil War era in Philadelphia. The property was neglected with only minimal maintenance performed over the last 40+ years. The building was in severe decline and in need of stabilization and restoration on many fronts. Cracked ledge plates were chipped out and reestablished, internal walls damaged by leakage were broken out and repaired, brickwork was repointed and in severe cases reestablished to original strength and beauty. Leaks around the base of the building were addressed to stabilize deterioration of the foundation. Large rotted window sills under beautiful stained glass windows were restored after significant masonry reestablishment due to water damage under the rotted out sills. Broken and missing stained glass windows are in the process of repair and replacement. The process started with new metal frames cast by Mr. Grady. The new frames will hold clear painted replications of the original stained glass, also crafted by Mr. Grady. Regular windows all around the church and manse were also repaired and restored. Roof leaks were accurately identified and repaired. A sagging plaster ceiling has been torn out and restored. All this work was done by Mr. Grady alone or with an occasional helper. He worked with care, expertise and respect for the original structure. The results far exceeded our expectations and have injected new life into a building on the brink. This building, owned by the Presbytery of Philadelphia, now houses a new urban ministry in a newly gentrifying area of the city. We are happy to have had the good fortune to be connected to Grady's Painting and Plastering & Construction"
your go-to local solution for reliable, high-quality home repairs and maintenance. From fixing leaky faucets and mounting TVs to full room painting and drywall repair, we handle the honey-do list so you don’t have to.
Hello, Im a do it yourselfer that has years of experience in all areas. As a previous general manager, I am very professional and understand what people want and expect.
My name is Dan I have been working as a carpenter for a local union but decided to go different route in life. I work with my brothers on houses and we Do It All. No job is too big or too small. From small things like furniture install to stripping down your house completely and remodeling it we can Do It All.
"The various tasks went very well. The job was completed it a very fast time frame with short notice helping keep the closing date for selling my home."
GOKEY`s Painting & Construction is locally owned out of Chateaugay, New York, formerly located in Kingston, New York. \n\nWe take a YOU-centered approach to ensure we can Paint or Build your home or business to your level of expectation. \n\nOur primary work is with high end homes, businesses, or multi unit properties, since recently expanding to Northern Upstate New York we will gladly give you a free estimate on any level home, business or multi unit property, to tell you exactly what it will cost and when it will be finished. \n\nCurrently offering everything listed in the Categories section, we specialize in Painting interior, exterior, asphalt roofing shingles (installation and repair), metal roofing (installation), drywall installation (from installation to finish), new decking and deck repairs, building small additions/garages/small repairs, as well snow removal from driveways and roofing. \n\nREADY TO MOVE\n FORWARD WITH YOUR\n DREAM?\nCONTACT US TODAY TO \nTAKE THE FIRST STEP\n(845) 741 - 4767\n
"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"
Metal stud framing parts include the studs themselves, upper and lower tracks that act as top and bottom wall plates, various angle fasteners and clips, screws for fastening pieces togeher, metal straps, c-channel supports, and thicker steel supporting structures. Roof framing metal components include pre-fabricated trusses, heavy-gauge stud pieces, and various plates and fasteners.
House framing can be expensive because the materials are pricey, and the job requires a high level of expertise. The more complex the plans, the more expensive the job, but even the most basic frame needs to be installed with high-quality materials and precision. When pricing your home’s framework, remember that a sturdy frame is necessary to create a safe structure.
Joists do distribute their load to beams, but they don’t sit on top of the beams. Instead, home builders nail or screw the joists directly to the beams such that the end of the joist butts up against the edge of the beam. Beams can sit on other beams for support, but you’ll never see a joist sitting on top of a beam or another joist.
Removing a load-bearing wall is best handled by professionals. However, if you have the skill set and decide to DIY the project, you will still need at least one additional person to assist you. Aside from helping with demolition, you'll need another hand to install the new support beam.
The best way to calculate framing costs is by basing your costs on the square footage of your home. On average, framing your home could cost anywhere between $7 and $16 per square foot.
To ensure you don’t go over budget, base your estimates on the higher end of the price range. If you know you’re going to use high-end materials or require a custom or complex build, you might even want to tack on an additional 5% of your budget.
The Watson, NY homeowners’ guide to carpentry services
From average costs to expert advice, get all the answers you need to get your job done.
Add a wow factor to your home with a chandelier. Chandelier installation costs depend on style, location, and labor, so learn what you can expect to budget.
When you’re tackling a project or hiring a contractor, it’s helpful to know key carpentry terms. From end grain to dovetail joints, here’s a complete list.
