Get matched with top door pros in Watson, NY

Many doors can be cut to size, but it depends on the door material. Solid wood doors are relatively easy to trim to a specific size, while hollow core and metal doors are trickier and can usually only be shaved down a little before you risk damaging them. If your door needs a lot of adjustment, it's best to order a custom size or have a pro do the resizing to make sure it holds up over time.

Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.

There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.

No, you cannot install a door without a jamb. The jamb is where the hinges, strike plate, and trim are attached. A person could ostensibly attach the hinges to the door frame itself, but it would hamper the door from opening and closing like normal. Door jambs also provide crucial support for the door and security for exterior entryways.

WD-40 can be used on squeaky door hinges, but it is generally considered a temporary, short-term solution rather than a long-term fix. While it can silence a squeak in a pinch by breaking down rust and grime, it is not a true lubricant, as it contains only a small amount of lubricating oil that evaporates quickly. Using WD-40 alone may lead to the squeak returning and can attract dirt and dust, potentially causing more wear on the hinge over time. For a more effective and lasting solution, it is recommended to first use WD-40 to clean the hinge, then wipe it clean. Afterward, apply a dedicated lubricant such as silicone spray, white lithium grease, a metal or plastic lubricant, or an oil-based product like petroleum jelly.