Best roofers near Port Byron, NY

You can install solar panels on a flat or pitched roof, but keep in mind that they will need to rest at a 30- to 50-degree tilt for optimal sun absorption. It costs more to install solar panels on a flat roof because you will need to install a framing system and likely hire a structural engineer. If your roof has a pitch of more than 40 degrees, it may not be a good candidate for solar panels.

Many insurance policies will not cover a roof with two layers of shingles. An additional layer of shingles increases the risk of various kinds of damage, and insurers typically won’t pay claims on a roof with an overlay. Adding a layer of shingles may even jeopardize your insurance coverage entirely, so check your policy to ensure you stay within coverage guidelines. 

Condensation can occur on the inside of a roof, but it should always be temporary. It does not necessarily mean there is a roof leak. Condensation happens when the inside and outside of a house are at different temperatures. For instance, if it is hot during the day and then gets very cold at night, the inside of the house will be warmer than the outside and may cause condensation to form on the inside of the attic. This may not be cause for concern, but if it is happening frequently, it should be addressed; otherwise, it could cause roof leaks, compromise the structural integrity of the wood, or allow mold to grow.

A roof's ability to handle snow depends on its strength and the snow's weight, as wet snow is much heavier than dry, fluffy snow. While designs in snowy regions often allow for 35 to 50 pounds per square foot, a general guideline is that a typical roof can withstand about four feet of fresh snow, two feet of packed snow, or just one inch of ice. Factors like the roof's age, slope, and support structure also affect its capacity; newer, sloped roofs generally hold more weight than older, flat ones. Ice and ice dams add significant, dangerous weight. Because capacity varies, it is best to contact a professional roofing contractor or the original builder to determine the maximum snow load for your specific home.