Get matched with top floor polishers in Lindley, NY

Both buffing and polishing increase the longevity of your floors by removing scratches and buildup, but they are different processes. Polishing removes the top layer of your floor, removing surface-level scuffs and scratches. Buffing your floor involves filling the scratches and scuffs with a buffing solution. No matter which method you choose, you can rest assured that both techniques will leave your floor looking shiny and new.  

Before starting on a full refinishing project, determine if your floors need to be completely sanded down to the bare wood or if the damage is shallow and mostly cosmetic. Deep scratches and gouges will require you to rough sand using a drum sander or belt sander, but small surface scratches or floors that have only lost their luster don’t need a complete overhaul. Instead, you can skip the rough sanding step and sand-screen the old finish with a buffer, removing only the top layer of polyurethane.

No, you cannot use bleach on Dekton. Avoid harsh chemicals when cleaning and treating Dekton. Such chemicals are unnecessary since Dekton is highly stain-resistant and nonporous. Instead, use a mild solution of water and soap or vinegar when cleaning your Dekton countertops and dry thoroughly with a clean cloth.

Most DIY floor cleaners don’t require rinsing, but you’ll want to make sure you don’t add too much dish soap or oil to the cleaner to avoid having to rinse it after cleaning. For non-wood floors, mix 8 parts warm water, 1 part vinegar, and 1 part baking soda with a few drops of dish soap. For wood floors, use olive oil in that same mixture instead of the vinegar. You can let these solutions air-dry after cleaning your floors with them, although you should manually dry your floors if they aren’t waterproof.