Top-rated welders.

Get matched with top welders in Henrietta, NY

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Henrietta, NY?

Select your specific project to find the pro for you.

Find Welders in Henrietta

Grady's Painting Plastering/Construction
2.0(
174
)

Serving Henrietta, NY and surrounding areas

Approved

In business since 1969

Free estimates

Emergency services offered

"I needed stucco repair work on an old chimney (and other spots). Grady was meticulous and thoughtful on what approaches and materials would work. Throughout the project they allocated sufficient time for each treatment to cure and inspected the work before proceeding to the next step. Grady started the project with no money down and only required ongoing payments for materials until the project was well underway. The final payment was due only after they did a final inspection. Total project cost was also below other bids."
Response time11 hrs
Response rate100%
Recommended by57%of homeowners
Avatar for Alpha Alloy Fabrications
Alpha Alloy Fabrications
5.0(
3
)

Serving Henrietta, NY and surrounding areas

In business since 2022

Free estimates

Emergency services offered

"They did an amazing job! Highly impressed with the care and quality that was put into the build. Very friendly with great customer service. Highly recommend!!!"
TIG Welded Parts
Custom Trays w/ Bronze Trim
Isometric View Archway
Stainless Steel Stairwell & Railing
Custom tray w/ Bronze Trim

+27

Response time3 days
Response rate88%
Recommended by100%of homeowners
Avatar for Do-It-All Contracting of New York, Inc.
Do-It-All Contracting of New York, Inc.
4.7(
29
)

Serving Henrietta, NY and surrounding areas

In business since 2007

Free estimates

Emergency services offered

"The job went very well. Doug provided a very fair quote to replace my 4 year old roof that was very poorly installed by a different contractor. He also provided a quote to replace my family room ceiling which was damaged due to the roof leaking. He responded to my request for an estimate within minutes and was at my house within 30 minutes to determine the work to be done. He was upset by the work by the previous contractor and his goal was to restore my confidence in small business contractors and he and his workers definitely did that. Doug and the crew were thorough and attentive to small details. They went above and beyond on some aspects of the job.....manufacturing and installing a finished edge where the roof met the house on the garage and on an addition, matching the paint color of my siding for that edging, painting the roof vents and power vent, adding very nice crown molding on the newly installed ceiling. The crew was friendly and respectful of my property and Doug checked in regularly to make sure things were progressing well and that I was satisfied. The job did take longer than the original estimate, but that was because of the issues that had to be dealt with. The work was completed for the price quoted. I will definitely contact Doug at Do It All Contractor for my next project. My confidence in contractors has been restored!"
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+21

Recommended by96%of homeowners
Avatar for John Carroll Heating & Cooling
John Carroll Heating & Cooling
4.9(
33
)

Serving Henrietta, NY and surrounding areas

In business since 2004

Free estimates

Emergency services offered

"I found John's name and contact information on the Irondequoit group on Facebook after several people had recommended him for HVAC services. After my furnace ignitor began to malfunction, I called him up and he was able to come over to look at the problem on the same day, and summarized my options to remedy the problem including parts, materials, labor costs, etc. As my boiler system is over 30 years old at this point, I opted to go with a brand new one. Knowing that my boiler may be nearing the end of its lifespan (and in the middle of winter) John scheduled himself for the work within a week's time. He was in my home all day and installed my new boiler along with the accompanying new piping, parts and fittings, including expansion tank, shut off valves, flu vents, etc. He was very professional, thorough, courteous, and cleaned up my basement and left it the way I found it. I would highly, highly recommend him to others."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+8

Recommended by100%of homeowners
Avatar for KJ's Welding Co.
KJ's Welding Co.
5.0(
1
)

Serving Henrietta, NY and surrounding areas

In business since 2018

Free estimates

Credit card accepted

We pride our company on reliability, great communication, integrity, and quality work. We strongly believe in giving our absolute best in all the work we perform. We are experts and will always keep you educated about the work process. We look forward to earning your business.

Response time2 days
Recommended by100%of homeowners
The Welding Guys
New to Angi

Serving Henrietta, NY and surrounding areas

In business since 2015

The Welding Guys is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests and make their concerns the basis of our business.

Showing 1-10 of 46
Welding questions, answered by experts

Yes, you can use a saw to cut metal pipes. The best saw to use is a reciprocating saw, but even a fine-tooth hacksaw can get the job done. No matter which saw you use to cut metal pipes, wear protective gear, like work gloves, safety goggles, and ear plugs. Apply a firm, steady pressure to the tool, and always ensure the pipes are secured so they don't move while you make the cuts.

Professional metal fabricators typically charge around $70 per hour, but the total cost of your project will depend on several factors. The largest cost drivers are the size, complexity, and design of the project, as well as the price and type of metal used. A good way to estimate the total cost is to multiply the cost of raw materials by four; typically, one-quarter of the total goes toward materials and three-quarters toward labor. Your geographic location can also influence costs, as labor and material prices vary by region.

Welding is the process of using extreme heat—and, sometimes, pressure—to attach two pieces of metal. In contrast, metal fabrication is a more involved process that can include welding, sheet metal work, bending, and other forms of metal manipulation. Metal fabrication is a large-scale project that may or may not involve welding, while welding is more often a step in larger fabrication projects.

Your typical household tools will not cut a metal pipe. To cut a metal pipe, you’d need more specialized tools like a pipe cutter or circular saw. Do not attempt to use these tools without taking proper safety precautions and wearing safety gear. It’s usually safer to let a pro cut a metal pipe, especially if you’re not confident in your skills with a heavy-duty saw.

Sawing your hot tub into more manageable chunks so it can be lifted easily into a truck takes several hours. Generally, 2.5 hours for smaller hot tubs and around 4 hours for larger ones with the help of one to two people. If money isn't a concern and you want to skip the physical labor, you can hire a pro to get the job done.

The Henrietta, NY homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.