Get matched with top roofers in Great Neck, NY

You should definitely be wary of roofing contractors who offer significantly lower prices than their competitors. Most roofers in the area are all dealing with the same cost of materials, and labor costs are often comparable, too. If they’re significantly cheaper than other companies around, it could be a scam. Read reviews and ask other roofing companies and contractors if they’ve heard of the suspected scamming company.

A roof's ability to handle snow depends on its strength and the snow's weight, as wet snow is much heavier than dry, fluffy snow. While designs in snowy regions often allow for 35 to 50 pounds per square foot, a general guideline is that a typical roof can withstand about four feet of fresh snow, two feet of packed snow, or just one inch of ice. Factors like the roof's age, slope, and support structure also affect its capacity; newer, sloped roofs generally hold more weight than older, flat ones. Ice and ice dams add significant, dangerous weight. Because capacity varies, it is best to contact a professional roofing contractor or the original builder to determine the maximum snow load for your specific home.

You can install solar panels on a flat or pitched roof, but keep in mind that they will need to rest at a 30- to 50-degree tilt for optimal sun absorption. It costs more to install solar panels on a flat roof because you will need to install a framing system and likely hire a structural engineer. If your roof has a pitch of more than 40 degrees, it may not be a good candidate for solar panels.

Metal roofs do not inherently leak more than shingle roofs; when properly installed, they are generally less likely to leak. Asphalt shingle roofs are more susceptible to leaks due to factors like wind uplift, damage from extreme weather, moss growth, and ice dams. Over time, asphalt shingles also lose their protective grit, which reduces their waterproofing capabilities. In contrast, metal is a more resilient material that stands up better to heavy precipitation and high winds. However, metal roofs can develop leaks if they are poorly installed, have improperly sealed fasteners, or experience issues from thermal expansion. For this reason, professional installation and regular maintenance are crucial to ensure a metal roof's longevity and superior protection against leaks.