Get matched with top asphalt driveway pros in Attica, NY

The cost to pour a driveway apron depends on the material and size. Concrete costs $3 to $10 per square foot, asphalt ranges from $2 to $5, and pavers are $5 to $15 per square foot. Additional expenses, like excavation, base material, and labor, can increase the total cost. For example, a standard 12x15-foot concrete apron could cost between $540 and $1,800, depending on local rates and additional work required. Always consult a local driveway paving contractor to get an accurate estimate tailored to your project.

Gravel driveways are significantly more affordable than asphalt driveways, making them an enticing financial decision when choosing your next driveway material. On average, gravel driveways are $5.75 to $13 per square foot cheaper than asphalt driveways. 

It's not just their price that makes gravel driveways more economical. Gravel driveways also can last up to 100 years with minimum maintenance, whereas asphalt driveways only last for 15 to 30 years with proper maintenance. But if you’re looking for the best driveway material for cold weather, asphalt may be a better choice.

The answer to whether or not you need to get a permit before you start your driveway can vary widely based on local ordinances and the scope of your driveway ideas. In most urban and suburban areas, a permit is needed before building a new driveway to ensure that a homeowner is using safe materials and proper drainage practices while designing and constructing a new driveway. In some rural areas, a homeowner may not be required to apply for a permit. When building a new driveway on your own, always check with your local building department to see if you need to request a permit. When hiring a driveway contractor, verify that the right permits are being used before driveway construction begins.

Yes, it is possible to pave over an existing driveway depending on the existing condition and type of material you plan to use. Factors to consider include current driveway condition, compatibility of the new material, thickness, surface prep, and driveway height.