Get matched with top roofers in Andes, NY

A roof's ability to handle snow depends on its strength and the snow's weight, as wet snow is much heavier than dry, fluffy snow. While designs in snowy regions often allow for 35 to 50 pounds per square foot, a general guideline is that a typical roof can withstand about four feet of fresh snow, two feet of packed snow, or just one inch of ice. Factors like the roof's age, slope, and support structure also affect its capacity; newer, sloped roofs generally hold more weight than older, flat ones. Ice and ice dams add significant, dangerous weight. Because capacity varies, it is best to contact a professional roofing contractor or the original builder to determine the maximum snow load for your specific home.

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

• Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

• Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.

Fall is generally considered the best time of year for roof repairs. The weather is temperate and typically drier, which makes for safer working conditions and fewer delays. The days are also still long enough to complete the work.

Spring is another good option and is a popular time for repairs to fix damage from winter storms. However, frequent rainfall can slow down progress. Spring may be a less busy season for roofers than fall.

Summer can also work for roof repairs, but extreme heat can make asphalt shingles too soft and difficult to work with.

Walking on an asbestos roof can pose a risk. Asbestos roofing materials can become brittle over time, increasing the chances of them breaking or releasing fibers when stepped on. Additionally, walking on an asbestos roof without proper precautions can cause further damage to the material. If possible, avoid touching an asbestos roof in any way and consult with a professional about removing and replacing the roof.