Get matched with top fireplace pros in Spring Creek, NV

If you’re looking for a cost-effective alternative to a traditional chimney, consider having a dummy chimney installed. Dummy chimneys can either be aesthetic-only or fully functional and can be installed on both new and older homes. Whether installed to match your neighborhood’s aesthetic or to vent your chimney, dummy chimneys are made out of a Glass-Reinforced Plastic (GRP) core, then covered with brick or stone slips to look like a traditional chimney.

A chimney cap costs about $300 on average to install, with prices ranging from $75 to $1,000. The final cost depends on several factors, including the professional you hire, the accessibility of your chimney, the cap's material and size, whether any repairs are needed, and if it requires custom fabrication. Chimney caps are usually made from galvanized steel, stainless steel, or copper. Copper caps are the most expensive, followed by stainless steel and then galvanized steel. Excluding labor, average material costs are around $100 for galvanized steel, $250 for stainless steel, and $600 for copper. You may also face additional costs, such as hiring a chimney sweep to clean the chimney before the cap is installed.

Your state, city, or even homeowners insurance company may have requirements on how far the outdoor wood furnace should be from the house, so be sure to abide by those regulations. In general, you should install an outdoor wood furnace or boiler as few as 30 feet or as much as 500 feet from the house or any other building.

There are several ways to determine if your chimney or fireplace damper is open or closed. A simple method is to check for airflow by placing your hand near the fireplace opening; if you feel a draft or hear wind whistling, the damper is open. An open damper might also make the room feel cooler, similar to the outdoor temperature, or cause your HVAC system to work harder than usual. For a more definitive test, you can try a visual inspection, although it may be difficult to see. Alternatively, you can light a small piece of paper and observe the smoke; if it is drawn up the chimney, the damper is open. Always use the damper handle to adjust its position.