Get matched with top foundation repair specialists in Schurz, NV

The most expensive foundation repair method is to install helical piers. Helical piers are a type of steel pier used to support sinking foundations in areas with poor soil conditions or deep bedrock. This foundation repair method can cost up to $3,000 per pier, including labor, because of its material and labor-intensive installation process. Total foundation repair costs can easily reach over $20,000 using this method.

Most single-story homes don't have foundations strong enough to support a second story, but they can be reinforced for an addition. A structural engineer can assess your foundation and what needs to be done to get it ready. They'll look at any cracks or unevenness in your current foundation and consider any special framing or beams your home needs, especially if it’s in a high-wind or hurricane area.

“To support a second story, many structural engineers will require that you install additional concrete piers in the crawlspace,” says Tschudi. “This involves hand excavating, pouring a large concrete footing—usually with specially coated rebar—and then building concrete piers right up to the girders.”

You'll find a slurry of natural and synthetic polymers, rubbers, epoxies, and resins used to bond old concrete to new concrete. The right bonding agent depends on the method of concrete pouring you choose and whether you're adhering concrete over concrete or concrete over sand and gravel. Some concrete resurfacing mixtures contain bonding chemicals as well.

Many horizontal cracks in home foundations result from water and soil pressure from outside of the building or from a footing that is shifting. Under those circumstances, horizontal cracks are a structural problem that requires repair before they become worse and more difficult to fix. However, in very specific cases, thin horizontal cracks may simply be a cosmetic blemish due to concrete shrinkage.