Get matched with top energy efficiency auditors in Eureka, NV

A blower door test shouldn’t take more than an hour, and most can be completed in less than 30 minutes. Expect the test to take longer once you start searching for leaks with thermal imaging or want to include sealing such leaks in the time estimate. The test doesn’t take much time and can’t be rushed, but it will take longer in large homes or those with many air leaks.

Home power is measured in kilowatt-hours, commonly expressed as kWh. The average home uses between 800 and 1,000 kWh per month. Peak usage (and highest bills) occurs in the middle of summer and the depths of winter. Keeping on top of your usage during these crucial months will lower your annual average usage considerably. 

You can determine what size generator you need by listing the various appliances it will power during an outage. Write down the start-up watt usage, and then add them all together. 

A 7,500-watt generator will run your refrigerator, freezer, well pump, and lighting circuits without a problem. However, you’ll need an extra 3,000 to 4,500 watts to run your water heater and another 5,000 to 25,000 watts to run your electric furnace. In these instances, a whole-home generator is your best bet for running your critical equipment.

Motion-sensor lights use one watt while on standby and five watts while turned on. They’re usually on for one hour over a 24-hour period, bringing the total wattage to about 28 watts per day. LED lights use around 6.5 to 8 watts while on. If you leave an LED light on all night, with night ranging from 10 to 14 hours, you’re looking at using 65 to 112 watts a night. You can minimally cut your wattage in half by switching to a motion-sensor light.