Get matched with top contractors in Empire, NV

Q: How much does labor cost to install tongue and groove walls?

• <div><p>Installing a tongue-and-groove wall requires similar techniques to those associated with installing shiplap. However, because of the precision necessary to make each board fit perfectly and the increased material prices, the cost is higher than that of shiplap installations. Expect to spend between $2 and $6 more per square foot for tongue-and-groove walls versus shiplap ones. </p></div>

Q: Do brick houses have framing?

• <div><p>Modern brick houses are really stick-built homes with a brick facade for aesthetic purposes only, so most have framing. With genuine brick construction, most homeowners install furring strips over the interior of the brick and then install drywall over those strips to cover the brick wall, so they don&rsquo;t have traditional framing. </p></div>

Q: Is it better to frame with nails or screws?

• <div><p>When deciding whether to use nails or screws for framing, the specific needs of the project must be taken into account. Nails have long been the go-to option for framing due to their affordability, ease of installation, and ability to withstand shear forces. They are perfect for structural framing projects where fast assembly is essential. In contrast, screws offer exceptional holding power and are particularly useful in situations requiring increased strength and resistance to pull-out forces. For projects that prioritize accuracy and long-lasting quality, screws may be the preferred option, though nails remain a dependable and efficient choice.</p></div>

Q: How much does it cost to frame a house?

• <div><p>The cost to frame a 2,000-square-foot house can fall anywhere between $14,000 and $32,000. This price can increase or decrease depending on what type of framing you choose, the quality of the materials, the project's complexity, and whether you decide to hire a professional to do the job.</p></div>

Q: Can you do a bump out for a closet installation?

• <div><p><a href="https://www.angi.com/articles/what-is-a-bump-out-addition.htm">Bump-out additions</a> can add some space to a closet without requiring any significant structural work. This entails pushing back the existing rear or side of the closet, simply moving the wall into either an adjacent room or unused space. For ground-floor closets, this could even be extended to the exterior of the home, but that has its own complications. Bump-outs are a good discussion to have with your contractor if you&rsquo;re just looking to increase the space a little&mdash;not renovate the entire closet space. </p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your contractor service project in Empire, NV?

Select your specific project to find the pro for you.

Find Contractors in Empire

JPC

4.6(

)

Serving Empire, NV and surrounding areas

Approved

Free estimates

Emergency services offered

Warranties offered

"Perfect. Juan always answered my phone calls, was punctual and did outstanding job. Will definitely use again for future projects. Pricing was very reasonable."

+101

Response time6 hrs

Response rate99%

98 neighbors recently requested a quote

Serving Empire, NV and surrounding areas

In business since 2006

Credit card accepted

"I never contacted the provider or used this service in anyway. I have to
write this review so that the request to write this review stops
popping up.
The rating is bogus as it is required to be able to submit.
"

California Client Saves with HMD Designer Discounts

Recommended by54%of homeowners

Request Quote

Jill Seidner Interior Design

3.5(

)

Serving Empire, NV and surrounding areas

In business since 2006

Credit card accepted

"They did a good job. She had to submit like a photo but my daughter had them work on the central are of the loft. The deal was for one room. She got a lot of good ideal from her and it was worth it for her. They were professional and I did not hear anything negative."

Recommended by55%of homeowners

Request Quote

Richard D Wood Landscape Architect

5.0(

)

Serving Empire, NV and surrounding areas

In business since 1961

Free estimates

"Richard Wood came highly recommended for our landscape renovation in Juniper Trails, Caughlin Ranch. As a licensed landscape architect and architect, he brings great insight and value to landscape, hardscape and architectural details. After visiting several of Richard s projects, we knew that his sensibilities and vision aligned with ours. He is a naturalist with an eye to flow and subtle beauty. His collaborative style made this a great project."

Recommended by100%of homeowners

Serving Empire, NV and surrounding areas

"Jim was great!! My husband passed away a few months ago who could repair anything!!! I’m relieved that I have Jim Short to call for house projects. I will be calling Jim again."

Recommended by80%of homeowners

Request Quote

Vortex Filtration Inc

5.0(

)

Serving Empire, NV and surrounding areas

In business since 2000

Free estimates

Emergency services offered

"Excellent!! Best water filtration system available!!"

Recommended by100%of homeowners

Request Quote

Kemo General Contractor, Inc.

0.0(

)

Serving Empire, NV and surrounding areas

In business since 2007

Free estimates

Kemo General Contractor Inc. Is a home builder from foundation up and can provides additions and remodels. We have been serving the metro area since 2007.

Recommended by100%of homeowners

Request Quote

BIG n Littles All Around Handyman Services

New to Angi

Serving Empire, NV and surrounding areas

In business since 2022

Free estimates

Emergency services offered

It can be a daunting task looking for only the right contractor for your job but also the right contractor for you. We completely understand what you're going through. We know every customer has different desires, different needs and different schedules. We're only here to turn your ideas into reality but to make it a memorable experience every step of the way. Call us right now, no matter where you are in the planning process.

Request Quote

Hampton Enterprise LLC

3.7(

)

Serving Empire, NV and surrounding areas

In business since 1989

Free estimates

Emergency services offered

"I only use James when I need some work done to my house. He responds fast, gets the work done quicker than just about anyone else I've ever used and seems very concerned with leaving his customers happy."

Recommended by60%of homeowners

Request Quote

Super Brothers Services LLC

4.0(

)

Serving Empire, NV and surrounding areas

In business since 2018

Free estimates

Emergency services offered

"It was way beyond my expectations. They were thorough explaining every step of the process and went above and beyond to make sure I got exactly what I wanted. I will definitely use Super Bros. Services again for any future home projects."

What we consider our very first remodel as a business

Recommended by100%of homeowners

Request Quote

Showing 1-10 of 13

Unfinished Carpentry questions, answered by experts

Installing a tongue-and-groove wall requires similar techniques to those associated with installing shiplap. However, because of the precision necessary to make each board fit perfectly and the increased material prices, the cost is higher than that of shiplap installations. Expect to spend between $2 and $6 more per square foot for tongue-and-groove walls versus shiplap ones.

Modern brick houses are really stick-built homes with a brick facade for aesthetic purposes only, so most have framing. With genuine brick construction, most homeowners install furring strips over the interior of the brick and then install drywall over those strips to cover the brick wall, so they don’t have traditional framing.

When deciding whether to use nails or screws for framing, the specific needs of the project must be taken into account. Nails have long been the go-to option for framing due to their affordability, ease of installation, and ability to withstand shear forces. They are perfect for structural framing projects where fast assembly is essential. In contrast, screws offer exceptional holding power and are particularly useful in situations requiring increased strength and resistance to pull-out forces. For projects that prioritize accuracy and long-lasting quality, screws may be the preferred option, though nails remain a dependable and efficient choice.

The cost to frame a 2,000-square-foot house can fall anywhere between $14,000 and $32,000. This price can increase or decrease depending on what type of framing you choose, the quality of the materials, the project's complexity, and whether you decide to hire a professional to do the job.

Bump-out additions can add some space to a closet without requiring any significant structural work. This entails pushing back the existing rear or side of the closet, simply moving the wall into either an adjacent room or unused space. For ground-floor closets, this could even be extended to the exterior of the home, but that has its own complications. Bump-outs are a good discussion to have with your contractor if you’re just looking to increase the space a little—not renovate the entire closet space.

The Empire, NV homeowners’ guide to contractor services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Dan Simms
•
May 30, 2026May 30, 2026
How Much Does It Cost to Install an Outlet in an Unfinished Basement? [2026 Data]
Need to run electricity to your basement? Learn about the cost to install an outlet in an unfinished basement and what factors affect your project cost.
Angi
•
Mar 18, 2026Mar 18, 2026
How Much Do Carpenters Charge Per Hour? [2026 Data]
Find out how much carpenters charge, including average rates, cost factors, and tips to help you budget for your next carpentry project.
Angi
•
May 30, 2026May 30, 2026
How Much Does Carpentry Framing Repair Cost? [2026 Data]
Get the latest carpentry framing repair cost estimates. Learn what impacts your price and how to budget for your framing repair project.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Fence Painter
Learn how to hire a qualified fence painter, from finding reputable pros to asking the right questions. Get expert tips for your fence painting project.
Ben Kissam
•
May 22, 2026May 22, 2026
What to Do if Your Contractor Doesn’t Finish the Job: How to Handle Unfinished Contract Work
Here’s how to responsibly handle unfinished contract work in a way that’ll give you peace of mind and help remediate your home improvement project.
Derek Rose
•
Mar 19, 2026Mar 19, 2026
Who Can Refinish My Deck?
If you’re wondering—who can I get to refinish my deck?—you’re in the right place. Learn who you can hire to refinish your deck if you aren’t up for the DIY.