Get matched with top garage door pros in Salem, NM

The first place you start with any garage remodel, regardless of the project, is with repairs. You want a stable foundation to avoid problems from arising down the road. Once any necessary repairs are addressed, you’ll want to move on to layout changes, like installing new walls, running new electric, plumbing, and HVAC to the space, if required, and then finishing work.

Garage door sensors should be installed on each side of the door, typically six inches off of the ground. The sensors communicate through an infrared beam, so they need to face each other directly for the system to work properly. Make sure they’re level and aligned, and keep the area around them clear. If they’re too high or out of alignment, your garage door won’t function properly.

Yes, you can pressure wash epoxy floors, but you must take precautions to avoid damaging the surface. While most epoxy floors can be cleaned with a mop, you might choose to pressure wash if the floor is stained, has ground-in dirt, or is covered with mold or mildew. To do so safely, first soak any stains or dirty areas with a gentle cleanser. Use a lower pressure setting with a gentle nozzle, such as a green, white, or black tip, or a 45-degree angled tip. Keep the spray nozzle at least 18 inches away from the floor to protect the surface. Using a surface cleaner attachment or a rotary scrubber can also help prevent overspray. Be cautious if using a power washer that heats the water, as the combination of heat and pressure may be too powerful and could damage the epoxy coating.

The best method for painting a garage door depends on the door's design and the finish you want to achieve. For the most professional-looking finish, especially on doors with panels or intricate details, a paint sprayer is an excellent choice. It can easily get into hard-to-reach places and provide a smooth, even coat.

If you don't have a sprayer, or if your door is flat, a combination of a roller and a brush is the most effective approach. Use a roller for the large, flat sections to cover the area quickly and efficiently. For the best results, experts recommend a roller with a nap between ⅜ and ¾ inches thick; natural fibers can also help ensure an even coat.

A brush is essential for handling the finer details. Use it to paint grooves, angles, small panels, and the edges of the door where you need more control.

Regardless of the tools you use, it's a good idea to step back after the main application to review your work and use a detail brush to touch up any missed spots.