Best countertop repair pros near Raton, NM

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Unfortunately, you cannot put hot pans directly on laminate countertops, as the heat can cause significant damage. The heat can cause chips, burns, and marks, plus weaken the laminate. If you do have something hot you need to set down, then be sure you use a trivet or towel as a barrier between the countertop and pan so you can prolong its life.

Both quartz and granite are durable, long-lasting countertop materials that can last for decades, potentially the lifetime of your kitchen, with proper maintenance. Quartz is generally considered more durable than granite due to its nonporous nature. However, it can be damaged by extreme heat. Granite is also very durable but is a porous material that requires regular resealing to extend its lifespan and prevent stains. On the other hand, granite is more resistant to heat than quartz.

The easiest way to calculate a countertop's square footage is to divide your countertop into squares and rectangles, then multiply the length and the width of each piece in inches before adding them together and dividing by 144.