Best sonic cleaning pros near Peralta, NM

Moss grows in dark areas of roofs, including in corners and gutters. If left alone, it can grow under roofing and cause permanent damage. Here’s how to remove moss from metal roofs: 

• Soak the moss to soften it

• Scrub it away with a soft-bristled brush, or pick it off with your hands (be sure to wear gloves)

• Use a moss remover that’s compatible with metal roofing, following the manufacturer’s directions

• Remove dead moss and rinse the roof thoroughly

• Prevent future moss growth by trimming branches, cleaning gutters, and attaching zinc strips to moss-prone areas

It is a bad idea to try to walk on a roof with snow on it. In fact, you should stay off your roof all year long, even when it is dry and sunny outside. There are too many things that can go wrong, and one misstep can cause serious injury or even death.

Rather, if you need to get something done on your roof, call in a pro. They have the right experience and know-how to get things done safely on a snowy roof, including snow removal.

If you’re painting your home or monitoring a job as it’s being completed, squash the issue ASAP if you notice paint is getting onto the roof. Keeping it clean is one of the keys to extending your roof’s life.

Removing latex paint before it dries is much easier and lowers the risk of damaging your shingles (more on that below). Simply spray the spot with a hose for one to two minutes to clear away the drying paint. In general, this is a good way to remove ugly stains from your roof without using chemicals.

You should avoid using a pressure washer on any surface or item that could be damaged by the high-pressure spray, as some materials are too delicate to withstand the force.

Key items and surfaces to avoid include:

• Electrical Components: Never pressure wash electrical systems, as water can cause short-circuits and create a safety hazard. This includes utility meters, breaker boxes, electrical outlets, generators, and HVAC or air conditioner units.

• Delicate and Fragile Materials: Fragile items can crack, shatter, or be stripped by the pressure. Avoid pressure washing windows, glass, light fixtures, shingled roofs (especially asphalt), and stucco.

• Painted, Stained, or Sealed Surfaces: Unless your goal is to strip the finish, do not pressure wash painted surfaces, stained wood (like decks), or anything with a protective seal that could be stripped away. Be especially cautious with older surfaces that may contain lead paint.

• Soft Woods and Certain Decking: Delicate surfaces like softwood, composite decking, and antique or wooden patio furniture can be etched or damaged. If you must wash wood, use a lower-powered pressure washer with a wide-angle nozzle to prevent damage.

• Living Things: Never use a pressure washer on people, pets, or plants. The force can cause serious injury and will destroy landscaping.