Best fencing pros near La Luz, NM

Maintain your wattle fence by inspecting it at least twice per year for loose weaving and degrading branches. Replace any seriously degraded sections, ensure water drains properly around the posts, and trim any sprouting branches if you used green wood. If you notice the weave loosening, you can often tighten it by gently pushing down on the top branches. You can also apply a natural wood preservative every two to three years to extend the fence's lifespan.

If you’re looking for a budget-friendly fence material, corrugated metal could be the answer. Metal fences cost about $7 to $32 per foot. Aluminum corrugated metal tends to be less expensive than steel. Both options are similar in cost to wood, so, depending on the type of wood you are considering, corrugated metal could be better for your budget.

You can DIY a stockade fence installation, but prepare to put in some good sweat equity. For the best results, carefully plan the exact location of your fence before you break ground. In particular, carefully map out your post locations before setting them in concrete. Be sure to call your local utility company before digging to avoid damaging underground wiring and causing severe injury.

On the other hand, installing stockade fencing on your own might sound too overwhelming. It’s certainly time-consuming and labor-intensive. Besides the hard work, you must install it properly to avoid gaps. Unless you’re confident you can get the job done right, hiring a privacy fence installer near you is the way to go.

You shouldn’t try to touch the electric fence, as it will shock you. Typically, the shock is low enough to be uncomfortable to humans or animals that come into contact with the fence. But an electric fence with high voltage, or a faulty fence, could shock you and cause serious injuries when touched.