Get matched with top buffing and polishing pros in La Junta, NM

Using water when cutting stone drastically reduces the amount of dust that comes off the stone. It’s beneficial to cut down on the amount of dust for respiratory and other safety reasons, such as keeping your vision clear while using an electric tool. Even with protective eyewear, the dust can still cloud your safety glasses. You should always wear protective gear when cutting stone.

The frequency for sealing granite countertops depends on several factors, including the type of sealant used, the color of the granite, and how heavily the countertops are used. As a general guideline, resealing is often recommended every 12 to 18 months, but some sources suggest it could be as often as every few months or at least once a year.

The type of sealant is a major factor: water-based sealants may need reapplication every six months to a year, while more durable solvent-based sealants can last for five to 10 years. Additionally, factors like heavy kitchen traffic, frequent use of acidic cleaners, and lighter granite colors may require more frequent sealing to prevent staining.

To determine if your countertops need resealing, you can perform a simple water test. Place a few drops of water or a wet paper towel on an inconspicuous area of the granite. After 10 to 15 minutes, check the spot. If the water has beaded up, the seal is still intact. If the water has been absorbed and darkened the stone, it's time to apply a new coat of sealant. You can choose to seal the granite yourself or hire a professional to ensure it's done correctly.

White quartz is a very low-maintenance countertop material. It’s nonporous, so it won’t stain, even if you spill dark liquids on it. The light color will make dirt show up much easier, but a simple wipe-down will keep the countertops looking fresh and bright for years to come. However, it might not be the best kitchen countertop idea on a budget because it's expensive.

If you notice dull spots on your marble floor, that could result from etching. If you’ve used the wrong type of floor cleaner in the past or left a spill unattended for too long, your marble floor may have suffered some surface damage. While there are ways to protect your natural stone from etching, you may have to call in a professional for repairs.