Best countertop repair pros near Hobbs, NM

The frequency for sealing granite countertops depends on several factors, including the type of sealant used, the color of the granite, and how heavily the countertops are used. As a general guideline, resealing is often recommended every 12 to 18 months, but some sources suggest it could be as often as every few months or at least once a year.

The type of sealant is a major factor: water-based sealants may need reapplication every six months to a year, while more durable solvent-based sealants can last for five to 10 years. Additionally, factors like heavy kitchen traffic, frequent use of acidic cleaners, and lighter granite colors may require more frequent sealing to prevent staining.

To determine if your countertops need resealing, you can perform a simple water test. Place a few drops of water or a wet paper towel on an inconspicuous area of the granite. After 10 to 15 minutes, check the spot. If the water has beaded up, the seal is still intact. If the water has been absorbed and darkened the stone, it's time to apply a new coat of sealant. You can choose to seal the granite yourself or hire a professional to ensure it's done correctly.

Caesarstone® offers both quartz and porcelain counters, which are types of engineered stone countertops. Generally, you can expect to pay $50 to $200 per square foot for quartz countertops. If you decide to go with Caesarstone® quartz counters, then you’ll pay $75 to $125 per square foot, which is in the mid-range of what most quartz manufacturers charge.

Additionally, Caesarstone® is typically less expensive than quartzite, which is a natural quartz countertop that costs $80 to $220 per square foot. Depending on the Caesarstone® countertop you choose, you may spend significantly more on quartzite counters.

With the cost of kitchen countertops ranging from $1,900 to $4,300, you’ll want to choose a countertop material that’s durable and cost-effective. Marble countertops will come in on the high-end, whereas corian, quartz, stainless steel, and granite will run in the middle range. Butcher block and laminate are the most budget-friendly—and many DIYers choose to install butcher block on their own because it’s one of the more accessible countertops.

Marble countertops cost $3,000 on average, ranging from about $2,000 to $5,000, depending on the type of marble, square footage, location, and whether you use tiles or slabs. Another major cost factor to consider is the grading of the marble, which determines its quality level.

Use this grading system when selecting marble for countertops:

• Grade A: Nearly perfect with subtle veining

• Grade B: Minor flaws such as pits, fissures, or blotches

• Grade C: Minor and major flaws like chipping and cracks requiring repair

• Grade D: Significant damage needing repair, with dark veining and pronounced colors