Get matched with top garage door pros in Dexter, NM

In most cases, you do not need planning permission to change a garage door to a normal door, unless a specific restriction is present on your home’s deed. If you’re changing the door because you are trying to convert the garage into a living space, you will need to work with building control for proper signoffs to ensure your conversion meets all of the necessary construction standards.

The most common garage door material is aluminum, but the best material for you depends on your budget and location. Wood is the most expensive to repair but tends to add the most curb appeal, while fiberglass or composite doors cost less to fix.

Aluminum won’t rust, so it’s a great option if you live somewhere humid or rainy. Steel doors are durable but are prone to rust. If you live somewhere with extreme temperatures, hot or cold, you might opt for fiberglass, which won’t split if the temperatures skyrocket or drop below freezing.

It is highly recommended to prime a metal surface, like a garage door, before painting. Primer creates a stable surface for the paint to adhere to, which helps prevent bubbling, chipping, and peeling. This ensures the paint job will last longer. Painting metal without a primer can lead to poor adhesion and allow rust to bleed through the new paint. If the surface already has rust spots, you can cover them with a zinc chromate primer before applying the final coat. While priming adds an extra step and cost, it is a worthwhile investment for a durable, long-lasting finish. For best results, also use a paint specifically designed for metal.

Yes, you can pressure wash epoxy floors, but you must take precautions to avoid damaging the surface. While most epoxy floors can be cleaned with a mop, you might choose to pressure wash if the floor is stained, has ground-in dirt, or is covered with mold or mildew. To do so safely, first soak any stains or dirty areas with a gentle cleanser. Use a lower pressure setting with a gentle nozzle, such as a green, white, or black tip, or a 45-degree angled tip. Keep the spray nozzle at least 18 inches away from the floor to protect the surface. Using a surface cleaner attachment or a rotary scrubber can also help prevent overspray. Be cautious if using a power washer that heats the water, as the combination of heat and pressure may be too powerful and could damage the epoxy coating.