Get matched with top fencing pros in Norwood, NJ

You’ve likely been considering lots of wood fence ideas for your yard. There are many reasons why people choose split rail fences time and again. For one, they’re one of the most wallet-friendly fencing options, especially since you don’t need to use much hardware and setting the posts doesn’t require concrete or foam. So if you have a large property and want to fence it in, your best bet may be a split rail fence.

While power washing isn't a requirement before you stain a fence, it can make the job much easier and faster while reducing manual labor requirements. The stain will not work if the wood is full of dirt and dust, so power washing, sometimes called pressure washing, is a fast and effective way to prepare the wood for staining. Remember that you need to stain or repaint relatively soon after the wood has dried so that there isn’t time for dust and dirt to build up again. 

Whether you need a permit to build or install a fence depends on several factors, including your location, the fence's height, its placement in your yard, and the materials used. In many cities and highly populated areas, a permit is required, especially for fences taller than 6 feet. Conversely, rural areas may have fewer restrictions. Typically, backyard privacy fences 6 feet or shorter do not require a permit, while front yard fences often have a lower height limit, sometimes as low as 3.5 feet. There can also be exceptions for properties in mixed residential-commercial zones. It's best to check with your local building inspection or zoning department to understand the specific requirements, height restrictions, and location rules for your area. A professional fence installer can help you navigate this process and often secure the necessary permits for you, though this may extend the project timeline.

When your rolls of silt fence join together, you’ll want to overlap them to make sure they’re still as effective at keeping water out without requiring fastening together. Overlap two sections of the silt fencing so that two sheets of fabric cover the span of two posts. If you want to fasten them together, you can staple them or use a zip tie, depending on whether your posts are metal or wood.