Get matched with top door pros in Delaware, NJ

The best direction for a gate to swing depends on its location and purpose, but swinging inward is the general rule. An inward swing is often considered safer, prevents the gate from opening into public spaces like a sidewalk, and may be required by local building codes.

There are exceptions and specific considerations. If your property is on a slope, an inward swing might not be possible. For a deck gate, it's safest to have it swing away from any steps. In a backyard, the direction can be a matter of preference, though an inward swing can be helpful when carrying heavy items like a wheelbarrow into a garden.

Regardless of direction, ensure the gate can open fully without hitting any objects or blocking spaces. While an inward swing is standard, a gate that can swing both in and out offers the most flexibility if your setup allows for it.

Standard door sizes aren’t one-size-fits-all, but there are common go-to dimensions. For exterior doors—like your front door—36 inches wide by 80 inches tall is typical, though you’ll see 30- or 32-inch widths too, especially in older homes. Interior doors vary more. Bedrooms and bathrooms often use 30- to 32-inch widths, and closet doors can be anything from slim singles to wide bi-folds. Height is usually 80 inches across the board; however, always measure your actual opening. “Standard” only works if it matches what’s already in place.

The difference between a mortise latch and a tubular latch is how they're mounted. A mortise latch has a single integrated lock body. One long rectangular space is cut into the door to contain it. A single keyhole is used to unlock both the dead bolt and latch from the outside. A tubular latch is a standard setup with a dead bolt separate from the regular spring bolt latch.

You should hire a licensed and insured door contractor with prior experience installing folding doors. Installing these doors is much more complex than installing a standard sliding door; don’t leave this work to a general handyperson or attempt to install it yourself.