Get matched with top roofers in Valentine, NE

Yes, thatched roofs are legal in most areas in the U.S., but you should always check your local building codes to ensure there are no restrictions in your particular area before installing one. Even where they are legal, you’ll usually need to apply fireproofing to the roof to keep it up to code. Keep in mind that a new roof might not increase home value as much if you choose a thatched roof, as they aren’t common in the U.S. and might not be as desirable to many home buyers.

The roof overhang, also known as the eaves, does count as part of the roof’s square footage because it must be covered with the roofing material. The overhang is one of the reasons why you can’t base your roof's square footage on the square footage of the house. The roof square footage must also account for the pitch of the roof as well as the eaves.

Generally, hailstones that are one inch in diameter or larger can cause significant damage to a roof. However, smaller hail can also cause damage, particularly when accompanied by strong winds, if it strikes an aging or poorly maintained roof, or if hailstorms are frequent in your area. Hail that is ¼ inch (pea-sized) or smaller poses a minimal risk of immediate, permanent damage, but cumulative impacts can cause deterioration over time. The extent of the damage also depends on the roofing material; hail-resistant tiles like slate or certain types of asphalt shingles can withstand impacts better than other materials. If you are concerned about potential damage after a storm, it is always a good idea to have a professional roofer conduct an inspection.

Furring strips (also called wood stripping) are not always necessary for a metal roof installation, but they are highly recommended and may be required by local building codes or the roofing manufacturer's specifications. There are several key reasons to use them:

• Energy Efficiency: Furring strips, made of wood or metal, create an air gap between the metal panels and the roof deck. This acts as a thermal break, reducing heat transfer into your home and improving overall energy efficiency.

• Moisture and Condensation Control: The air gap allows for better airflow, which helps prevent moisture buildup and condensation under the metal panels.

• Structural Support: They provide a solid, even frame to which you can attach the metal roofing panels.

It is especially important to use furring strips when installing a metal roof over existing shingles. Without them, the roof surface can be uneven, and you will experience greater solar heat gain.