Get matched with top concrete driveway pros in Terrytown, NE

Yes, you should screw your flange to the subfloor, including cement. The best way to get this done is to predrill holes into the concrete using a hammer drill and a ¼-inch concrete bit. Be careful when you’re ready to bolt your flange down, as you can accidentally crack it. You can avoid this issue by not installing the screws too deep. Or, you can opt for a flange with a stainless steel ring so you don’t have to worry about cracking the plastic.

The average cost to replace concrete depends on the amount of material you need. However, you can expect the cost of replacing a concrete driveway to range from $2,000 to $7,000, or about $15 per square foot.

If you want to install or replace a concrete patio, the cost ranges from $800 to $9,000, depending on the size and exact materials. If you only need a slab, concrete slab costs range from $4 to $8 per square foot, or an average of $5,400.

No, cement cannot be used on its own except for rare circumstances, as it's only a binder to form other products, such as concrete or mortar. Follow the manufacturer's instructions to create a concrete or mortar mix. Concrete, for instance, needs cement, water, and aggregates such as sand and gravel. Using the right amount of water and water temperature is essential to ensure you have the right concrete slump and the mix spreads easily and cures well.

It’s possible to pour concrete if the temperatures are expected to dip below freezing at night, but you need to take some special precautions before you do. Most importantly, you need to make sure your concrete won’t freeze, so the best thing to do is enclose the area and heat it. You should also make sure you’re using cold-weather concrete that’s designed for pouring in cold weather. Use accelerants to help speed up the curing process and avoid cold temperatures from resulting in weak concrete.