Get matched with top roofers in De Witt, NE

Gable vents are more common in older homes built before the 1970s. Homes built after this era use ridge vents or soffits, but you can sometimes find homes with both gable and ridge vents. Gable vents can have a purely aesthetic purpose, while ridge vents hide in the roof shingles so air can flow under the roof while keeping the attic dry.

The roof overhang, also known as the eaves, does count as part of the roof’s square footage because it must be covered with the roofing material. The overhang is one of the reasons why you can’t base your roof's square footage on the square footage of the house. The roof square footage must also account for the pitch of the roof as well as the eaves.

If you need to replace the roof over your attached garage, a roofing contractor can perform what is called a partial roof replacement that only affects garage roofing. However, it's important to keep in mind that only replacing a portion of your roof creates a situation where your roofing has two different lifespans. You will also miss out on the opportunity for a full roof warranty. In some cases, having two different roofs on your home could increase risks for leaks. When replacing the roof on a detached garage, homeowners have the option to make the project bigger by upgrading their home roof alongside their garage roof. However, this isn't necessary if your home has a newer, properly functioning roof. It is better to try to match the new garage roof to your home's existing roof instead.

Some people prefer to use connectors consisting of galvanized metal to replace the birdsmouth cuts on the rafter board. Common names for these metal pieces include hurricane ties and variable-pitch connectors. Making birdsmouth cuts is more cost-effective than purchasing these connectors for each rafter. However, because making large birdsmouth cuts to accommodate extra-wide exterior walls can weaken the rafter, a connector may be the better option in some cases.