Get matched with top drywall pros in Creighton, NE

Furring strips, thin strips of wood or metal, are not always required for ceiling drywall installation. If the ceiling surface is even and in good condition, drywall can be directly attached to the ceiling joists using screws. However, furring strips become essential when dealing with irregular surfaces or when additional insulation or soundproofing is needed. They create a level substrate for attaching the drywall. Ultimately, the decision to use furring strips depends on the condition of the existing ceiling and the specific requirements of the project.

You should do a little bit of sanding between adding coats of mud. Knock down any ridges or significantly imperfect areas through sanding, which should help you apply the next coat of mud smoothly. If your first coat of mud is pretty smooth after it dries, a quick sanding is all you’ll need. Don’t forget to wipe away any dust after each sanding process.

Two of the biggest mistakes with drywalling are not measuring (and therefore buying the wrong amount of drywall) and trying to install drywall yourself. A sheet of drywall can weigh around 50 pounds, so it can be difficult to install without a pro or at least some experienced friends willing to help with a DIY installation. It can also get expensive if you don’t measure at least twice before buying the drywall sheets.

Yes, wainscoting is installed directly over drywall. However, ensure the drywall is in good shape since it will support the wainscoting. If the drywall has issues, such as holes, mold, or mildew, repair them before installing the wainscoting. Alternatively, you can install a plywood substrate before attaching the trim.