Get matched with top drywall pros in Crofton, NE

You should wait at least 24 hours between each coat of drywall mud before sanding and adding another coat. This ensures the mud dries completely, although drying time depends on temperature, humidity, and the type of compound used. Lightweight muds dry faster, while heavier all-purpose compounds take longer. Always check for firmness and dryness before sanding or applying the next layer.

In most cases, no, you won’t need a permit to replace drywall. If you’re changing the floorplan of your home by adding or removing walls during the drywall project, then you might need a permit, but replacement or repairs usually doesn’t require a permit. Your drywall professional should be able to confirm whether or not a permit is required for your project. If it is, it’s likely to add between $50 and $150 to your total cost. Keep in mind that you will need permits if you plan to install new electrical wiring or plumbing lines behind your new drywall.

You should leave a gap between drywall sheets because they naturally expand and contract along with the building framing as temperature and humidity change. Most pro drywall installers leave a gap of about ⅛ inch between drywall sheets, allowing the sheets to expand, contract, and shift without cracking or becoming damaged. If you don’t leave enough gaps between slabs, the edges will press against each other when they expand, and the pressure can cause visible cracks.

Two of the biggest mistakes with drywalling are not measuring (and therefore buying the wrong amount of drywall) and trying to install drywall yourself. A sheet of drywall can weigh around 50 pounds, so it can be difficult to install without a pro or at least some experienced friends willing to help with a DIY installation. It can also get expensive if you don’t measure at least twice before buying the drywall sheets.