Should you sand your fence before staining?

• <div><p>On most untreated wood fences, there is no need to sand before treating. You typically only need to sand if there’s an old coat of paint or stain on your fence. If you do need to sand off a previous paint or protective coating (like an old stain or sealant), use medium-grit sandpaper.</p></div>

Get matched with top fence painters in Steele, ND

Q: How many coats of stain is too much?

• <div><p>Stain is meant to be absorbed by the porous wood, allowing some of the natural grain to show through. With that in mind, you don&rsquo;t want to add more stain than the wood can absorb, as you risk covering up its natural markings. Generally, two coats is the maximum you should do, although very dense hardwoods may only be able to take a single coat.</p></div>

Q: What is the easiest way to stain your fence?

• <div><p>The easiest way to stain a fence depends on your experience and comfort level with the project. Applying stain with an airless sprayer or pump sprayer might get the stain job done faster, but it can be tricky. Paint rollers and stain brushes are slower but simpler for a DIY project.</p></div>

Q: Can you paint galvanized chain link fencing?

• <div><p>Yes, you can paint galvanized chain link, but the process is a bit more difficult as it requires additional prep work. Before applying the primer and paint, you must remove the original coating from the metal, which can be time-consuming. If the original coating is not removed, the primer and paint will not bond properly and cause peeling over time.</p></div>

Q: How many coats of stain are needed for a fence?

• <div><p>Typically, a fence requires one to two coats of stain. The exact number can vary depending on the porosity of the wood. For specific guidance, it's best to check the manufacturer's instructions. After applying the first coat and letting it dry completely, you can assess the finish. If it appears patchy, uneven, or you want a more saturated color, a second coat is recommended. An extra coat can also help cover lap marks.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your fence painting project in Steele, ND?

Select your specific project to find the pro for you.

Verified Reviews for Fence Painting pros in Steele, ND

*The Angi rating for Fence Painting companies in Steele, ND is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Fence Painting needs.

*The HomeAdvisor rating for Fence Painting companies in Steele, ND is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Fence Painting needs.

Last update on May 25, 2024

Reviewed in May 2024
Completed job, very thorough and explained what had to be done! Always ask if and stated why work was needed!
CHX Electric, LLC
Request a quote
Reviewed in October 2023
Lots of rework. Poor communication. Cut holes into Sheetrock in the wrong spot and left them without sayin anything. Now I have a 6” cut in the Sheetrock in the upstairs of my house. Also Said they were gonna lower the sink vent so it doesn’t stick up 12” above and behind the washer and dryer,...
Bauer Plumbing & Heating Inc
Request a quote
Reviewed in August 2023
Excellent work and very knowledgeable about trees!
The Joshua Tree Company
Request a quote
Reviewed in February 2018
Best price for best value for best quality.
Kamrose Construction Inc
Request a quote
Reviewed in July 2015
My salesman was excellent in his attention to the details in the ordering process as well as keeping me informed throughout the entire process. The installation crew did an outstanding job, were prompt and handled all my questions well. Would definitely recommend this company. <br />
The Window & Door Store
Request a quote
Reviewed in March 2015
They were very considerate and thorough. They pretty much were very attentive to what I wanted. I just had a bad experience with another contractor and they bent over backward to give me what I wanted. I was so happy with them!
Siding Repair Systems
Request a quote
Reviewed in May 2014
I did not buy home so did not need profesional
Groundworks
Request a quote
Reviewed in March 2012
I would rate them highly. I would use them again in the future.
SHIPLEY ELECTRIC
Request a quote
Reviewed in November 2011
I had my 93 Ford F350 7.3 diesel brought in for a routine recall and they performed additional checks and services. It took twice the time they told me 1hr versus 30 mins. I do understand that sometimes things get complicated and take more time. It's the services that they tried to con me into...
EIDE FORD LINCOLN
Request a quote

Find Fence painters in Steele

No results for Fence painter in

Try adjusting your search criteria.

Fence Painting questions, answered by experts

Stain is meant to be absorbed by the porous wood, allowing some of the natural grain to show through. With that in mind, you don’t want to add more stain than the wood can absorb, as you risk covering up its natural markings. Generally, two coats is the maximum you should do, although very dense hardwoods may only be able to take a single coat.

On most untreated wood fences, there is no need to sand before treating. You typically only need to sand if there’s an old coat of paint or stain on your fence. If you do need to sand off a previous paint or protective coating (like an old stain or sealant), use medium-grit sandpaper.

The easiest way to stain a fence depends on your experience and comfort level with the project. Applying stain with an airless sprayer or pump sprayer might get the stain job done faster, but it can be tricky. Paint rollers and stain brushes are slower but simpler for a DIY project.

Yes, you can paint galvanized chain link, but the process is a bit more difficult as it requires additional prep work. Before applying the primer and paint, you must remove the original coating from the metal, which can be time-consuming. If the original coating is not removed, the primer and paint will not bond properly and cause peeling over time.

Typically, a fence requires one to two coats of stain. The exact number can vary depending on the porosity of the wood. For specific guidance, it's best to check the manufacturer's instructions. After applying the first coat and letting it dry completely, you can assess the finish. If it appears patchy, uneven, or you want a more saturated color, a second coat is recommended. An extra coat can also help cover lap marks.

The Steele, ND homeowners’ guide to fence painting services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Deane Biermeier
•
Jul 10, 2026Jul 10, 2026
How Much Does Fence Painting Cost? [2026 Data]
Looking to give your fence a refresh? This guide explores the cost to stain a fence—and the cost to paint it, too— so you can budget for your project.
Timothy Moore
•
Jul 9, 2026Jul 9, 2026
How Much Does It Cost to Stain a Fence? [2026 Data]
Staining a fence is a great project if you’re a handy DIYer. Learn how much it costs to stain a fence and how you can influence the price.
Michelle Nati
•
Aug 3, 2026Aug 3, 2026
How Much Does a Hog Wire Fence Cost? [2026 Data]
This guide breaks down hog wire fence cost factors to help you budget for a rustic, trendy fence style at an affordable price.
Angi
•
May 21, 2026May 21, 2026
Who to Hire for Fence Painting
Wondering who to hire to paint fences or who to call for fence painting? Explore pro options, the process, and what to expect before you book.
Gemma Johnstone
•
Aug 9, 2026Aug 9, 2026
9 Best Fence Paint Colors for Your Yard
Deciding on the best fence paint color is difficult. This guide will help you choose a shade that creates the right vibe alongside your house color and landscaping.
Scott Dylan Westerlund
•
Jul 9, 2026Jul 9, 2026
How to Paint a Chain Link Fence in 3 Steps
Increase your curb appeal by taking your chain link fence from dull to bold with fresh paint. Here’s how to paint a chain link fence to keep it looking great.