Get matched with top drain pipe installers in Killdeer, ND

To keep window wells from filling up with water, you need to stay on top of maintenance. Remove debris as it fills up, and regularly loosen the gravel at the base if it’s become compacted. You can also reslope your yard to make sure water flows away from the window well (and your home’s foundation), and you can even install a window well cover to prevent debris from building up. Installing an actual drainpipe at the base of the well can also prevent window well drainage problems.

You can fix a leaking outdoor spigot by replacing the washer, tightening the bonnet, or replacing the spigot altogether. Turn off the water supply and open the spigot to see the issue. You may need to tighten the bonnet by 1/8- to 1/4-inch of a turn. You might also need to see if the washer is damaged or worn. If those fixes don’t stop the leak, you should replace the outdoor spigot. Consider a frost-proof sillcock to prevent future freezes and leaking. 

There are several reasons why you might not get enough water pressure in your house. For one, you might have leaky pipes—a common cause of low water pressure—that divert water flow from the places you need it (like your faucets and showers). Blocked pipes, faulty fixtures, and closed valves are three more possible culprits. In other cases, your low water pressure might be the result of a local water supply issue.

You can buy a sealant spray for a leaking copper pipe, but it’s not a permanent solution and isn’t usually a good idea. For the best adhesion, you should drain the pipe, let it dry completely, apply the spray, and wait for it to dry before turning the water back on. Even with proper technique, a sealant spray is a temporary fix, so you should only use this technique in the interim to prevent water damage if you’re waiting for a more permanent fix.