Get matched with top epoxy flooring pros in Enderlin, ND

Most garage floor paints are epoxy-based and available in DIY kits. One-part epoxies are simpler to apply than two-part epoxies, which have a more involved process. Sometimes, people also use latex-based paint because it’s easier to clean up mistakes with soap and water. Either way, make sure your paint is specifically designed for concrete garage floors. It should say so on the label.

Resurfacing a garage floor takes about eight hours on average, with another couple hours over three days to do the epoxy. Epoxy goes on in three coats, with each coat taking 24 hours to dry and cure. You’ll need to keep foot and vehicle traffic off of your garage floor for around 4 days in total when replacing your garage floor, so be sure to plan ahead before you start. This is a great time to organize your garage since you’ll need to move everything out to apply the epoxy.

Unlike staining concrete, painting concrete often results in chips and peeling over time. You can expect numerous touchups over the years if the concrete is in a high-traffic area. Since concrete paints are opaque, you may also find it more difficult to get the exact color results you want. Lastly, painting concrete can make it much more slippery unless you mix in an additive for traction.

Flooring professionals can typically apply epoxy within one or two days, depending on how much preparation or repair the old floor needs before application. However, you’ll need to wait after the application is complete to use the flooring. While you can walk on the epoxy flooring before it fully cures, it can take up to 72 hours for the epoxy floor to fully dry and be ready for full use.