Get matched with top wrought iron workers in Bowman, ND

Installing a fence when the ground is frozen presents challenges, but it's possible with the right approach. First, mark and measure the fence line accurately. Use a power auger or manual post-hole digger to create holes in the frozen ground, ideally when it's less rigid during warmer parts of the day. Consider using pre-made fence post anchors or driving metal posts into the ground. Ensure posts are secure with concrete for stability. Allow extra time for the concrete to cure. Additionally, be cautious of frost heave, which may affect post-alignment. Installing in milder winter conditions is often more manageable.

Deer can crawl under a fence if it has a gap of around 6 inches or more. Make sure to close all gaps at the bottom of your fence to keep deer out, and the bottom of the material should be tightly secured, or the deer will push right through it. As an added benefit, closing shorter gaps at the bottom of a fence can also keep rabbits out of your yard.

A high-quality wrought iron fence is one of the most durable options available and can last a lifetime, or even centuries, with proper care. However, wrought iron is susceptible to rust and corrosion if not maintained.

To maximize its lifespan, regular maintenance is required. This includes:

• Cleaning the fence with soapy water every six months.

• Scrubbing away any rust or corrosion as soon as it appears.

• Applying a new coat of paint or refinishing the fence every few years to protect the metal from moisture and oxygen. The recommended frequency varies, with sources suggesting anywhere from every 1 to 10 years.

If significant rust develops, it's wise to hire a professional fence repair company to clean the rust and reseal the fence. The cost to refinish a fence is typically between $5 and $12 per square foot, a worthwhile investment to ensure its longevity.

You can buy wrought iron fencing from a trusted fence installation company near you. You could also opt to buy it privately from a homeowner who is interested in recycling their own wrought iron materials. Manufacturers stopped mass production of wrought iron as steel became more affordable to produce, so you likely won't find it in any local big box stores.