Top-rated paving pros.

Get matched with top paving pros in Todd, NC

Enter your zip and get matched with up to 5 pros

Need a pro for your paving service project in Todd, NC?

Select your specific project to find the pro for you.

TRUSTED BY TODD, NC HOMEOWNERS

  • Average homeowner rating star icon3.9
    Average homeowner rating
  • Verified reviews icon12
    Verified paving services reviews

Find Paving pros in Todd

Avatar for Santiago Construction
Santiago Construction
4.3(
8
)
Interlocking Pavers for Patios, Walks & Steps - Install

Serving Todd, NC and surrounding areas

Approved

In business since 2019

Free estimates

Credit card accepted

"We hired Santiago Construction of Boone, NC, to install stone fascia on our addition's foundation wall. We were not only pleased but completely satisfied with the end result. The picture shows the mortar joints were uniform in width, and the stone layout placement was like a piece of art. Francesco's, the mason who did the work, was a master. His attention to detail was incredibly impressive, as shown in the staggering of the stone end faces laid out vertically at the corners. He is old-school, a master at his work, and you could see his commitment as he worked each day diligently and professionally. It looks like a work of art, and we enjoy seeing it every day."
Response time2 days
30 neighbors recently requested a quote
...
Showing 1-10 of 56
Paving Services questions, answered by experts

The answer to whether or not you need to get a permit before you start your driveway can vary widely based on local ordinances and the scope of your driveway ideas. In most urban and suburban areas, a permit is needed before building a new driveway to ensure that a homeowner is using safe materials and proper drainage practices while designing and constructing a new driveway. In some rural areas, a homeowner may not be required to apply for a permit. When building a new driveway on your own, always check with your local building department to see if you need to request a permit. When hiring a driveway contractor, verify that the right permits are being used before driveway construction begins.

Compared to a 10x20 concrete driveway costing between $800 and $3,000, a resin bound driveway of the same size costing $3,900 to $4,000 is the more expensive option. However, the cost still makes resin a cheaper option compared to a 10x20 paver driveway costing an average of $12,000.

Yes, you should lightly wet the sand with a hose before laying the pavers on top. This activates the bonding agents in the sand, ensuring that your pavers don’t shift around during the installation process. However, you should make sure that the sand is not soaked; overwatering can cause the sand and pavers to not set properly.

If you wish to break up a cracked or broken paver for removal, you can use a hammer or mallet and a chisel to fragment the paver. As you’re working, be careful not to disturb surrounding pavers; the key is to work slowly and steadily and remove the broken pieces gently. You should also wear a mask and goggles to ensure that no dust gets into your eyes, nose, or mouth as you work.

Paving is a part of hardscaping, so all paving is hardscaping, but not all hardscaping is paving. Paving involves laying down concrete or asphalt, while hardscaping can also include the use of paving stones, bricks, gravel, wood, and more. Hardscape features that involve paving are considered permanent and will increase your property taxes, while some other hardscaping features—like those involving bricks, gravel, and paving stones—will not affect property taxes. Paving also typically requires a permit, while hardscaping features considered temporary will not.

The Todd, NC homeowners’ guide to paving services

From average costs to expert advice, get all the answers you need to get your job done.