Get matched with top countertop and backsplash pros in Spindale, NC

The short answer is yes. A stone-safe, pH-neutral cleaner and a soft cloth are all you need to clean and maintain terrazzo. Harsh cleaners aren’t necessary. You can also apply stone polish every few months to refresh your terrazzo.  

It’s recommended that you clean your terrazzo countertops daily to remove dust before it begins to build up. Dust and other debris can cause small scratches over time. If you spill something, be sure to clean it up immediately before stains set in.

The timeline to install countertops largely depends on the materials and the job size. Installing granite countertops takes anywhere from two to seven hours, though complex designs can pass the eight hour mark. Average-sized quartz countertops take two to five hours to install, though most pros will recommend a 24-hour settling period. Marble, on the other hand, is finicky and can take up to two whole days to install. No matter how you slice it, however, a professional is going to complete the job much quicker than an amateur.

The lifespan of painted countertops depends on the products used and how well they are maintained. Generally, they can last for a couple of years before needing a fresh coat. To maximize their longevity, it is vital to apply a durable sealer, such as a resin or water-based acrylic topcoat, over the paint. After applying the sealer, allow it to cure for the full recommended time, which can range from seven to ten days, to ensure a fully protected surface.

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.