Top-rated structural engineers.

Get matched with top structural engineers in Roseboro, NC

Enter your zip and get matched with up to 5 pros

Need a pro for your structural engineering project in Roseboro, NC?

Select your specific project to find the pro for you.

Verified Reviews for Structural Engineering pros in Roseboro, NC

*The Angi rating for Structural Engineering companies in Roseboro, NC is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

*The HomeAdvisor rating for Structural Engineering companies in Roseboro, NC is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

Last update on January 17, 2026

Find Structural engineers in Roseboro

Avatar for PJM Structural

PJM Structural

4.98(
23
)
•Approved Pro

PJM Structural

4.98(
23
)
•Approved Pro
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers
3 years of experience

Licensed Structural Engineer with 13 years of structural design experience. I provide the following services: - New construction design (Residential, commercial, office, etc) - Remodels and Tenant improvements - Truss repairs - Bearing wall removal - Trellis, pergola and carport design - Concrete, Steel, Wood and Masonry design - Custom stairs

"Pedro was great to work with! After multiple attempts to work with other structural engineers, his rate was the lowest while being the most responsive and informative. He made the process smooth and efficient, providing excellent service and clear communication throughout the project. Highly recommend!"

Hilary C on July 2024

Licensed Structural Engineer with 13 years of structural design experience. I provide the following services: - New construction design (Residential, commercial, office, etc) - Remodels and Tenant improvements - Truss repairs - Bearing wall removal - Trellis, pergola and carport design - Concrete, Steel, Wood and Masonry design - Custom stairs

"Pedro was great to work with! After multiple attempts to work with other structural engineers, his rate was the lowest while being the most responsive and informative. He made the process smooth and efficient, providing excellent service and clear communication throughout the project. Highly recommend!"

Hilary C on July 2024

Avatar for EHM

EHM

4.50(
16
)

EHM

4.50(
16
)
Customers say: Quality work
72 years of experience

EHM is a structural moving and elevating company that also specializes in foundation repair and replacement. We have been working in the Midwest since the Great Floods of 1993. We specialize in severely comprised foundation issues. We can elevate, level, pier or replace a wall or your entire foundation. We do not do mudjacking, waterproofing or minor crack repair.

"I did not get the service that we originally talked about I am very unhappy"

Donna S on August 2021

EHM is a structural moving and elevating company that also specializes in foundation repair and replacement. We have been working in the Midwest since the Great Floods of 1993. We specialize in severely comprised foundation issues. We can elevate, level, pier or replace a wall or your entire foundation. We do not do mudjacking, waterproofing or minor crack repair.

"I did not get the service that we originally talked about I am very unhappy"

Donna S on August 2021

Avatar for Matrix Technology Services

Matrix Technology Services

No reviews yet

Matrix Technology Services

No reviews yet
13 years of experience

Matrix Technology Services is an Oklahoma grown company founded and operated by a born and raised Oklahoma Veteran. Our commitment to quality and customer satisfaction will not be matched. With over 20 years of experience in electronics and low voltage wiring, we bring a unique combination of abilities and qualifications. We are a Bicsi Certified company. Knowledge and education are an integral part of our operation and philosophy. We seek to provide only the most qualified ICT cabling professionals in the industry. Contact us today to see how we can improve your ICT experience.

Matrix Technology Services is an Oklahoma grown company founded and operated by a born and raised Oklahoma Veteran. Our commitment to quality and customer satisfaction will not be matched. With over 20 years of experience in electronics and low voltage wiring, we bring a unique combination of abilities and qualifications. We are a Bicsi Certified company. Knowledge and education are an integral part of our operation and philosophy. We seek to provide only the most qualified ICT cabling professionals in the industry. Contact us today to see how we can improve your ICT experience.

CDR ENGINEERING

1.00(
1
)

CDR ENGINEERING

1.00(
1
)
34 years of experience

Home and Building Inspections (primarily structural) for purchasers and mortgage companies and insurance companies.

"Gateway mortgage company recommended Roger and CDR inspections to do a structural inspection of one of our rental properties before approving a refinance. He did not give it a pass, and suggested having nine piers installed around the perimeter of the house. After some due diligence, we discovered that Eden’s had already installed piers in 2020, and we communicated this to Roger. He said he would not give the property an OK until the adjustments were made, so we had Edens come out and adjust the piers, as well as add three additional piers to another corner, per Roger’s instructions. After completing all work, both we and Chris Padley from Gateway Mortgage have been emailing and contacting Roger for 6 weeks to do a final inspection so that we can move forward with our refinance, and he is disregarding all of our phone calls and emails. This has been one of the most frustrating experiences we have ever encountered. We are unable to move forward on our very important refinance until he signs off on this structural inspection. Our lender told us, “I am at a complete loss why he won’t respond.” Look elsewhere, Roger is not friendly and he’s not willing to work with customers."

Homeowner on June 2022

Home and Building Inspections (primarily structural) for purchasers and mortgage companies and insurance companies.

"Gateway mortgage company recommended Roger and CDR inspections to do a structural inspection of one of our rental properties before approving a refinance. He did not give it a pass, and suggested having nine piers installed around the perimeter of the house. After some due diligence, we discovered that Eden’s had already installed piers in 2020, and we communicated this to Roger. He said he would not give the property an OK until the adjustments were made, so we had Edens come out and adjust the piers, as well as add three additional piers to another corner, per Roger’s instructions. After completing all work, both we and Chris Padley from Gateway Mortgage have been emailing and contacting Roger for 6 weeks to do a final inspection so that we can move forward with our refinance, and he is disregarding all of our phone calls and emails. This has been one of the most frustrating experiences we have ever encountered. We are unable to move forward on our very important refinance until he signs off on this structural inspection. Our lender told us, “I am at a complete loss why he won’t respond.” Look elsewhere, Roger is not friendly and he’s not willing to work with customers."

Homeowner on June 2022

SMOLEY ENGINEERS & CONSULTANTS

No reviews yet

SMOLEY ENGINEERS & CONSULTANTS

No reviews yet
27 years of experience

Multi-faceted planning, engineering and consulting firm, specializing in structural engineering for wood design, masonry, steel & concrete, green design, and wind engineering, serving architects, engineers, contractors, builders, developers, and owners from many business sectors. Practice areas include residential, office, retail, commercial, and industrial markets. Currently licensed as a Professional Engineer in PA, MD, WV, VA, DC, NC, & SC. Member ASCE, SEI, AWC.

Multi-faceted planning, engineering and consulting firm, specializing in structural engineering for wood design, masonry, steel & concrete, green design, and wind engineering, serving architects, engineers, contractors, builders, developers, and owners from many business sectors. Practice areas include residential, office, retail, commercial, and industrial markets. Currently licensed as a Professional Engineer in PA, MD, WV, VA, DC, NC, & SC. Member ASCE, SEI, AWC.

Structural Engineering questions, answered by experts

First, most contractors will have a structural engineer create a report and plan for your project to ensure it’s safe to cut into the load-bearing wall. The contractor will then excavate around the wall, if necessary, measure the opening—allowing for additional space to fit and level the door, and then cut the doorway out. They will likely install a steel lintel as a header over the door for support. Once the doorway is cut out, they’ll demolish the concrete using sledge hammers and masonry chisels, clean up the surrounding concrete, and seal around the door with masonry mortar. 

Whether you’re building a new home or building an extension on your existing property, you will likely need both a structural engineer and an architect. A structural engineer will determine what loads your foundation and framing can safely handle, and an architect will draw plans according to those structural calculations to simplify the building process. You can start by contacting a structural engineer near you, as many work alongside architects and can get all of the prep work done at once.

The easiest way to tell if a wall is load bearing is to check if it’s an exterior wall or if it runs perpendicular to the joists above and below it (or parallel to beams). Exterior walls are almost always load-bearing, and walls that run under beams or parallel to them are also usually load-bearing. There are exceptions to these rules, and walls that don’t fit into these categories can still be load-bearing. If you’re unsure, hire a structural engineer to look at your home to assess whether or not the wall is structural.

A structural engineer’s report is almost always worth it, as it can help you avoid buying or overpaying for a home with structural issues. The most important thing the report does for you is provide peace of mind that you won’t have to pay thousands of dollars for structural repairs right after closing on a property.

A 4-inch-thick concrete slab can support around 4,000 pounds per square foot if a contractor reinforces the slab with rebar, while that same slab without reinforcements will support closer to 1,000 pounds. For the purposes of a patio, 4 inches in thickness without reinforcement should suffice unless you’re installing heavy kitchen equipment or a hot tub on it. In those cases, reinforcing your slab and sticking with 4 inches of thickness should provide plenty of strength.

The Roseboro, NC homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

What do you need done? We’ll find top pros.
  • 🌱 "Mow a small front yard"
  • 🛠 "Fix a leaking pipe under the sink"
  • 🏠 "Repair shingles on an asphalt roof"