Get matched with top cabinet makers in Otto, NC

The 1/3 rule is a design guideline used by interior designers and cabinet installers to select appropriately sized pulls for cabinets and drawers. The rule suggests that for a balanced and cohesive look, a cabinet pull should be approximately one-third the height of the cabinet door or one-third the width of the drawer face. This guideline helps create a symmetrical appearance because the human eye tends to follow the length of the pull across the cabinet face.

While the 1/3 rule is a helpful starting point, it is not the only option. If a measurement falls between available pull sizes, it's generally best to size up. For an ultra-contemporary aesthetic, you can also opt for full-width pulls that span the entire drawer.

Any of your garage shelves should be able to hold heavier loads, but it’s best to place heavier items on middle shelves. The only reason for this is to prevent injury—lifting heavy loads from down low requires squatting or bending over, which can lead to back injury, and lifting heavy loads off of high shelves in the garage can be especially dangerous if you drop them.

It is generally more cost-effective to purchase stock or semi-custom cabinets than to have them custom-built. The best option depends on your budget and customization needs.

Here is a breakdown of the average costs per linear foot:

• Custom Cabinets: $500 to $1,200. The final price is influenced by factors like materials, size, and design complexity. For example, a basic slab cabinet door might cost $60 to $70 for materials, while a more intricate mullioned glass inset panel door can range from $100 to $200 per door.

• Semi-Custom Cabinets: $150 to $700.

• Stock Cabinets: $100 to $400. These are pre-built and the most affordable option, but they offer limited customization and may not be suitable for rooms with unusual shapes or high ceilings.

There’s no strict rule about which way cabinet doors should open, but generally, double cabinet doors should open away from each other. With single doors, you want to avoid having them block your path or swing into  areas where people need to stand. Some kitchens are angled so that cabinet doors may crash into something no matter which way they swing, but the methods above can help prevent damage.