Get matched with top sewer cleaners in Mount Olive, NC

If you’ll be digging up your floor to get access to your pipes when putting in a sewer backflow preventer, this would also be a good time to take care of any other plumbing issues or renovations. For example, you could install additional pipes for a basement bathroom. Since the floor will be sealed over with concrete when you’re done, now’s a good time to take care of those bigger tasks.

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

Depending on the home, wastewater either goes into a septic tank and seeps back into the backyard or is sent via sewer system to a local sewage-treatment plant. Septic systems naturally separate different components of the waste so that it can naturally and safely disperse it. They are usually reserved for homes not served by a municipal sewage department (like rural homes). A treatment plant, on the other hand, speeds up that process through screening and purification.

If used correctly and sparingly, root killer shouldn’t damage your pipes. Make sure to follow the instructions on the back of the bottle or the company’s website to avoid any unintended damages. However, when it comes to copper sulfate, it’s better to avoid it. This type of root killer can damage your plumbing and the surrounding environment.