Get matched with top sewer cleaners in Fremont, NC

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

There is conflicting advice on whether to leave a baking soda and vinegar mixture in a drain overnight. Some sources suggest it can be effective for tough clogs, recommending that you flush the drain with warm water in the morning as part of a monthly cleaning routine. However, other experts advise against leaving the mixture in for extended periods, as its caustic nature could corrode drainpipes if used too often or left in for too long.

Never pour used motor oil down the drain. Doing so can have serious environmental consequences, including contaminating groundwater, endangering animals, and killing vegetation. It can also clog your pipes, causing backups in your plumbing or the wastewater treatment plant. In most places, pouring motor oil down the drain is illegal, whether you do it in your home or a storm drain.

If your drain doesn’t have metal crosshairs or crossbars, you should use a tub drain extractor. These tools create a grip on the drain so you can turn it using a 1/2-inch ratchet drive, drain key, or wrench. Your drain may not have crosshairs if it's old and broken.