Get matched with top electricians in Macclesfield, NC

Yes, GFCI breakers are required for all outdoor outlets. This code requirement applies to all outlets located on balconies, decks, patios, and other outdoor lounge spaces. In addition, outdoor outlets need to have watertight covers that provide protection when cords are plugged in. If you have an older home that may not be up to code, it's a good idea to also ask your electrician about adding GFCIs to some indoor areas. Kitchens, bathrooms, basements, and any other areas of a home that are commonly exposed to moisture should have GCFI breakers.

By nature, two-prong outlets aren't grounded—but the box they run to might be, which makes them safer. The safest way to test if an outlet is grounded is to purchase a circuit tester, which cost about $20 at home improvement stores. 

If you discover your outlet (or outlets) aren't grounded, know that this greatly increases your risk of personal injury and electrical fires. You may want to consider installing new three-prong ground fault circuit interrupter (GFCI) outlets. On average, the cost to install GFCI outlets is about $210 per outlet.

Three-way switches work in pairs, allowing an operator to control a single light or series of lights from two separate switch locations. Most often, a three-way switch controls a light or light series in a single room.

If one plug in your outlet works but the other doesn't, it could be due to a few reasons. The outlet might have a loose or damaged internal connection on the non-working side. Another possibility is that the outlet is a split receptacle, with one half controlled by a wall switch that might be turned off. Additionally, debris or damage inside the non-working plug could prevent a proper connection. If you can't identify the issue, remember to prioritize safety. Replace the outlet or consult a professional electrician to ensure safety and proper functionality.