Get matched with top fire pit installation pros in Lumber Bridge, NC

Recessed lights, as with any kind of light, can be a fire hazard if not installed correctly. Because of this, it’s best to have a professional complete the installation for you. Properly installed lights should not pose a threat and often have heat sensors installed in them that turn the light off if the temperature gets too high.

Burning a single palm tree stump, if you’re careful, is technically doable DIY. However, you should always take precautions to control the fire and do research if you’re burning multiple types of trees. 

Some trees, such as ornamental trees, black cherry, and some oak trees, release toxins into the air when burned that can be irritating to your lungs (or even dangerous) to breathe in.

While your municipality may have its own regulations requiring pergolas or other structures to be a certain height above a fire pit, the standard recommendation is that the pergola should be at least 10 feet above the fire pit. A taller pergola allows the heat from the flames to dissipate before reaching the structure.

If a light switch is off, it’s very unlikely to cause a fire. For a fire to start, the switch has to be on, activating an electrical current, and the wiring must be faulty. However, the malfunctioning light switch could cause an intermittent current to move across the electrical wire. This issue could become a fire hazard with another device connected to the wire. You should replace the bad light switch as soon as you notice it or call an electrician.