Top-rated floor polishers.

Best floor polishers near Hays, NC

Enter your zip and get matched with up to 5 pros

Need a pro for your floor polishing project in Hays, NC?

Select your specific project to find the pro for you.

Top-Rated Floor polishers in Hays - Updated Nov 2026

Avatar for Leo's contruction service
Leo's contruction service
5.0(
1
)
Clean & Polish Flooring - For Business

Serving Hays, NC and surrounding areas

In business since 2020

Free estimates

Credit card accepted

With over 9 years of experience in the demolition and asbestos industry, Leonel Ramirez is your industry expert in Iredell county and the surrounding areas. We pride ourselves on our extreme professionalism and attention to detail. Our customer satisfaction guarantee will assure you are completely satisfied with our work. You can trust that we will treat your home as we would treat our own. Give us a call today, we look forward to working with you!

Response time3 hrs
Response rate97%
Recommended by100%of homeowners
Bowman Floor Covering
0.5(
1
)
Clean & Polish Flooring - For Business

Serving Hays, NC and surrounding areas

In business since 1985

Free estimates

Credit card accepted

Here at Bowman Floor Covering, we pride our company on reliability, great communication, integrity and quality work. We strongly believe in giving our absolute best in all of our projects no matter how big or small. We are experts in our trade and will always keep you educated on your particular task or project. We look forward to earning your business!

Showing 1-10 of 16
Floor Polishers FAQs, answered by experts

Before starting on a full refinishing project, determine if your floors need to be completely sanded down to the bare wood or if the damage is shallow and mostly cosmetic. Deep scratches and gouges will require you to rough sand using a drum sander or belt sander, but small surface scratches or floors that have only lost their luster don’t need a complete overhaul. Instead, you can skip the rough sanding step and sand-screen the old finish with a buffer, removing only the top layer of polyurethane.

You can embrace minimalism when it comes to cleaning vinyl plank flooring. Water or diluted vinegar both work great for mopping and are much better options than some other cleaners that can damage the protective coating on these floors. Ammonia or solvent-based polishes can both break down the top layer. Also, avoid “mop-and-shine” cleaners, which tend to leave behind residue on vinyl plank floors.

Clean your vinyl plank floors at least one to two times per week with a broom, vacuum, or microfiber mop. You can save the mopping and disinfecting for your deeper cleans about two to three times a month. Keep in mind that if you find sticky spots, spills, or stains, it's best to take care of them ASAP.

If you have waxed floors or floors with a penetrating stain or oil, you can shine them up with some more wax and a cloth or floor buffer. After cleaning the floor thoroughly, apply wax to the floor in small sections and use a clean, dry cloth or towel to buff it until it shines. You can also use an electric polisher, which is especially handy for large floors.

Yes, but with caution. A floor grinder is intended to level and polish concrete, so it is a very powerful tool. To remove paint, the floor grinder should be set to 35 square feet per minute or less to minimize the pressure without the use of pocket weights. You might need to go over the surface two times to get any paint that has sunk into the concrete’s pores.

The Hays, NC homeowners’ guide to floor polishing services

From average costs to expert advice, get all the answers you need to get your job done.