Best flooring contractors near Forest City, NC

Resurfacing a garage floor takes about eight hours on average, with another couple hours over three days to do the epoxy. Epoxy goes on in three coats, with each coat taking 24 hours to dry and cure. You’ll need to keep foot and vehicle traffic off of your garage floor for around 4 days in total when replacing your garage floor, so be sure to plan ahead before you start. This is a great time to organize your garage since you’ll need to move everything out to apply the epoxy.

If you also need to know how to fill the gap between the floor and the baseboard, it's best to use a flexible, paintable latex caulk. Clean the area thoroughly to remove dust and debris. Then, apply a smooth bead of caulk along the gap using a caulking gun, and use a caulk-smoothing tool to press and smooth it into place. If the gap is large, you may need to insert backer rod, such as a foam filler, before caulking. Once dry, paint the caulk to match the baseboard for a clean, seamless look.

While it is possible to install carpet yourself, it is a challenging DIY project that requires precise measurement, proper cutting skills, and knowledge of correct installation techniques. The process involves multiple steps, including removing old flooring, installing underlayment and tack strips, and stretching the carpet to prevent wrinkles, which can take several days to complete.

Before starting, consider these factors:

• Warranty: Many manufacturers' warranties are voided if the carpet is not installed by a professional.

• Tools: You will need to buy or rent specialized equipment like a knee kicker, carpet stretcher, and seam roller.

• Complexity: DIY installation is most suitable for simple, straightforward rooms. Projects involving stairs or floor vents are significantly more difficult.

• Cost: While you can save on labor, the cost of tools plus the risk of expensive mistakes—which may require re-installation—can make hiring a professional more cost-effective in the long run.

Given the potential for errors, voided warranties, and the need for special tools, hiring a local carpet installer is often recommended to ensure the job is done correctly and safely.

On average, installing carpet costs between $3 and $11 per square foot, depending on factors like the carpet material, style, and labor rates in your area. Sometimes, installers will include carpet removal in these costs, so if you don’t have any carpet to remove, you can save time and spend less money on labor.