Get matched with top epoxy flooring pros in Browns Summit, NC

When properly installed and maintained, concrete floors can last from 50 to 75 years or more. The longevity depends heavily on the finish and maintenance routine. For example, polished concrete floors can last 50 years or longer but require periodic refinishing or resealing every 5 to 20 years, depending on foot traffic. To maximize the lifespan of any concrete floor, it's crucial to have it installed by a licensed professional, ensure it is properly sealed to prevent damage, and perform annual deep cleanings.

The best way to resurface a concrete porch is to clean and prep the surface, pour a layer of concrete on top, allow it to cure, then seal it. A concrete overlay provides a durable layer and enhances your porch's look. You can even choose a stamped overlay to make it look like stone or brick. To ensure structural integrity, repair concrete cracks before applying the new concrete. If the existing concrete is in significant disrepair, consider removing and replacing the concrete instead of an overlay.

The cost to seal concrete is around $1,500 on average, but you could spend anywhere from $1,000 to $7,000, depending on the type of sealer used and the size of the space. You may want to seal concrete that receives a large amount of foot traffic or heavy wear. While you can seal concrete yourself with materials from a home improvement store, you must ensure the surface is clean and ready to accept the sealer. Hiring a professional is often recommended to ensure good, even coverage that provides adequate protection.

Yes, you can seal old concrete, but proper preparation is essential. Before sealing, ensure the concrete is clean, dry, and free of any old sealant. To check if resealing is necessary, place a few drops of water on the surface; if they are absorbed in less than five minutes, it's time to reseal. If you are using the same type of sealer that was previously applied, you may not need to remove the old layer. However, if you are applying a different type of sealer, the existing one must be removed. Additionally, repair or fill any cracks to create a smooth base before you begin sealing.