Get matched with top garage cleaning pros in Saint Ignatius, MT

You’ll usually need to prime a garage floor before painting—especially if the floor is unpainted. Garage floors are made from concrete, which is porous and produces dust. The dust can contaminate the paint and cause issues with adherence. 

Primer creates a barrier and gives you a clean surface to work on. It also minimizes absorption to help give you an even, pro-looking paint job. Make sure you choose a primer that’s specifically designed to cover concrete flooring.

How often you clean your garage depends on what you do in there and its overall level of disarray. You should clean the garage once every season, though some experts say every month. Decluttering and deep-cleaning once a year is enough for garages used primarily for storage, but if you do car maintenance or other hands-on project in the space, you’ll need to clean more frequently.  

Yes, you can pressure wash epoxy garage floors. Most epoxy floors can be cleaned with a mop, but you may choose to pressure wash your floor if it is stained, has ground-in dirt, or is covered with mold or mildew. Before pressure washing, soak stains and dirty areas with a gentle cleanser for best results. Then use a pressure washer tip angled at 45 degrees and raise the spray nozzle to at least 18 inches off the floor to protect the flooring surface. You can also use a surface cleaner power washer or rotary scrubber to prevent overspray. 

It’s possible to use a torch to melt ice on your garage door, but we don’t recommend it. It’s very easy to bring the flame too close to the door, which can melt the weather stripping or even the garage door itself. You’ll melt ice quickly with a torch, but the damage you’re likely to cause can end up costing you a few hundred dollars to fix, which isn’t worth it. Instead, we recommend pouring hot water over the frozen area or using a less intense heat source, like a hair dryer or space heater.