Top-rated interior painters.

Get matched with top interior painters in Molt, MT

Enter your zip and get matched with up to 5 pros

Need a pro for your interior painting project in Molt, MT?

Select your specific project to find the pro for you.

TRUSTED BY MOLT, MT HOMEOWNERS

  • Average homeowner rating star icon4.7
    Average homeowner rating
  • Verified reviews icon68
    Verified interior painting services reviews

Find Interior painters in Molt

...
Showing 1-10 of 69
Interior Painting questions, answered by experts

Professionals may use a variety of methods to remove old paint from surfaces, often depending on the size and complexity of the surface. Paint scraping in combination with a chemical paint stripper is the most common method, but experts might also use heat or steam to loosen everything before peeling the paint off. Some might just sand off the old paint if the surface is relatively flat and easily accessible.

Yes, but with caution. A floor grinder is intended to level and polish concrete, so it is a very powerful tool. To remove paint, the floor grinder should be set to 35 square feet per minute or less to minimize the pressure without the use of pocket weights. You might need to go over the surface two times to get any paint that has sunk into the concrete’s pores.

Sanding surfaces, repairing damage, cleaning thoroughly, and using quality primers are all steps you can take for exterior home painting.

The biggest issue with painting your interior walls with exterior paint isn’t the way the paint looks or performs—it’s the lack of ventilation. The higher quantities of VOCs in exterior paint will have a harder time dispersing in an enclosed space, so do everything you can to direct them out—like turning on a fan and opening your windows and doors. Afterward, you can simply prime and redo your walls with interior paint, and no one will know the difference.

Yes, you can pressure wash epoxy floors, but you must take precautions to avoid damaging the surface. While most epoxy floors can be cleaned with a mop, you might choose to pressure wash if the floor is stained, has ground-in dirt, or is covered with mold or mildew. To do so safely, first soak any stains or dirty areas with a gentle cleanser. Use a lower pressure setting with a gentle nozzle, such as a green, white, or black tip, or a 45-degree angled tip. Keep the spray nozzle at least 18 inches away from the floor to protect the surface. Using a surface cleaner attachment or a rotary scrubber can also help prevent overspray. Be cautious if using a power washer that heats the water, as the combination of heat and pressure may be too powerful and could damage the epoxy coating.

The Molt, MT homeowners’ guide to interior painting services

From average costs to expert advice, get all the answers you need to get your job done.