"},"url":"https://www.angi.com/companylist/us/md/silver-spring/xtra-pair-of-hands-dc-reviews-5640605.htm"},"position":1},{"@type":"ListItem","item":{"@type":"LocalBusiness","name":"Tom of All Trades","address":{"@type":"PostalAddress","addressRegion":"MT","addressCountry":"US"},"review":{"@type":"Review","author":{"@type":"Person","name":"Bruce M."},"reviewBody":"This is a complete re-review of the project described below, the earlier review being done without sufficient inspection of the job as Tom performed it.
This was a project to install an exterior pre-hung door, from start to finish, including cutting the hole in the wall, installing the structural framing, placement and securing of the pre-hung door, installing the door hardware and making sure the entire installation was secure, stable and weathertight. The door was a passage from our dining room onto a deck I had just installed on the back of our house.
My initial review of Tom's work, done within 24 hours of his leaving and without sufficient inspection, was complementary. I commented upon his diligence, communication, punctuality and professionalism, and upon the apparent quality of the finished job. Apparent, that is, from a cursory look.
That review was premature. It was done based upon the appearance of the door, its presumed stability and the fact that it was plumb and functional. It was also done based upon our discussion of how to carry out the project and my observation that he seemed to know what he was doing as the project progressed throughout the day. However, after a thorough inspection of the job Tom did, some issues arose. They are detailed below.
Added as of 9/29/13: Tom's apparent inattention to detail and to finishing the project properly has worsened as time has passed and I've had further involvement with the results of the project. I've discovered several detail and finish items he either failed to do or did poorly and which were done or remediated by me. While I won't go into detail on each of these, suffice to say though they were detail and finish items, each was important to the integrity of the finished project and the functionality of the door. It was evident Tom had allotted a specific amount of time for the project and when everything didn't fall together as he needed, he simply left the project with a lot of loose ends undone.
One, it turned out the door was not weathertight. The evening after it was installed, there was evident daylight coming through the base of the door in each corner of the door sill. It turns out Tom failed to put in place two weatherstrip wedges designed to ensure the tightness of each of those corners. We recovered and affixed one of those wedges. He apparently threw the other away. Two, Tom had to cut out a portion of one piece of oak flooring to fit the door into place. This was something of a surprise to me since I had meticulously designed the surface of the deck to be one inch below the level of the inside floor. The door was then to be installed over the oak floor with additional substrate to support the door sill and frame and to make a smooth, solid transition from the dining room floor to the deck. But when Tom informed me the only way he could get the door to fit was to cut out this portion of the oak flooring, I was still under the impression he knew what he was doing. The only answer I can come up with for this error was that he built the structural framework to accommodate the pre-hung door without first determining the level of the finished inside floor. And with the structural framework already in place when he went to fit the door in place, he chose to cut out a piece of our floor rather than take apart that structural framework and rebuild it so the door could be placed as I had planned it.
Three, upon my thorough inspection of the installed door, I discovered that Tom had failed to install any substrate, or sub-sill, beneath the aluminum door sill that was integral to the pre-hung door assembly. Three inches of the aluminum sill was just hanging out over the deck with no underlying support. The problem here was that the aluminum flexed with even a slight amount of weight on it and it would have been impossible to seal the edges of the sill with that situation. More importantly, the sub-sill should have been installed before the pre-hung door was put in place to support the side framework and brick moulding that was part of the pre-hung assembly. Without the sub-sill not only would the aluminum sill be subject to bending from weight of people walking over it, but the entire door would have been subject to sagging over time. Additionally, without the sub-sill, the bottom of both the side wood frame and the brick moulding were exposed as raw wood and also open for insects, dust and debris, if not also moisture, to get into the framing of the pre-hung door. Which, of course would invite mold, wasp nests, and anything that might be blown into or otherwise enter those open cavities, which extended up the entire height of the door frame.
Four, the evening I first tried to lock the new deck door I was unable to get the deadbolt to work properly. The bolt did not seem to line up properly where it came out of the door. Upon further inspection, I discovered that the guide sleeves that are included with both the deadbolt and the lockset, designed to make sure the bolt kept its alignment, were not installed in either the deadbolt or the lockset. Once again, we recovered one of the sleeves, but the other was apparently thrown out. And, to be fair to Tom, these sleeves are not always part of the assembly of either a lockset or the deadbolt, but it seems that since they were in these instances, they should have been utilized.
All of the above problems have been or will soon be taken care of, by me. The one weatherstrip wedge we recovered has been affixed to the bottom side of the door frame and seems to have taken care of that problem. I am still contacting door companies in the area to find another wedge to install on the bottom of the hinged side of the frame. I will have to fashion an oak strip to trim the floor-to-threshold transition where Tom left a half-inch gap when he cut out a chunk of our floor. It will look like it was intended to be the way it will look after my fix, but it wasn't. I installed a sub-sill that will adequately support the pre-hung door structure and also close it to the elements. I did this with the door in place because I didn't want to have to tear out the door in order to put a sub-sill in. I layered it until I had a stable substrate for the entire pre-hung door and clad the sub-sill with colored drip edge flashing to act as a moisture barrier. While the flashing-to-deck transition may need future re-caulking, it is a stable installation as it stands and will keep the entire door stable. And finally, I have managed to get the deadbolt to work without the guide sleeve and will leave it that way unless it acts up again.
In my initial review, I stated I could have tackled this job myself but I felt it would have taken me three days, at four or so hours a day, to complete, and I wanted to get on with other installs I had yet to do on the deck itself and to get the wall closed up as soon as possible after it was opened to receive the door. As it turned out, I spent about three hours anyway correcting the omissions and mistakes on the door and, in retrospect, should have done the whole job myself. Live and learn. Though I'd like to think I've lived long enough not to have a whole lot left to learn.
And to put things in perspective, I have no animosity toward Tom. He's a personable guy who showed up when he said he would, worked diligently and, I assume, thought he'd completed the job when he left with my $400. If he left believing that, though he was mistaken, it was innocently so. If he left knowing he did an inadequate job, shame on him. And, of course, part of this deal is on me; I should have done a more thorough job of inspecting the finished product before he left. Still, the result would have been the same. In fact, I did notify Tom of the weatherstrip problem a day or so after his install. He responded quickly that he'd be over to take a look when he was back in town. Then I discovered all the other things th"},"url":"https://www.angi.com/companylist/us/mt/lolo/tom-of-all-trades-reviews-7498480.htm"},"position":2}]}
Grill Assembly reviews from real Angi homeowners in Clinton, MT
Last update on October 14, 2025
Hoyt Y.
5.0
08/2015
The provider, Xtra Pair of Hands, was responsive (on very short notice), professional and a pleasure to work with. I needed someone to provide all-around help with an informal BBQ for 30 people at my home. Steve exceeded my expectations - he showed up right on time to help with...
Bruce M.
2.0
08/2013
This is a complete re-review of the project described below, the earlier review being done without sufficient inspection of the job as Tom performed it. This was a project to install an exterior pre-hung door, from start to finish, including cutting the hole in the wall, installing the...
I am very capable of most all kinds of home and ranch repairs, from basic plumbing, electrical, drywall, cement and much more. If you need that job done and are at an impasse call me. Duane.
"Dwayne is professional, efficient and gets the job done right the first time. Not only is he a very hard worker he is kind and truly cares about his clients. He is a must have contact for a contractor!"
Jenny C on December 2023
I am very capable of most all kinds of home and ranch repairs, from basic plumbing, electrical, drywall, cement and much more. If you need that job done and are at an impasse call me. Duane.
"Dwayne is professional, efficient and gets the job done right the first time. Not only is he a very hard worker he is kind and truly cares about his clients. He is a must have contact for a contractor!"
PLS Finishing LLC is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business.
"James and his crew were very conscious and worked hard to do a great job. Their price was competitive and the quality of their work was above my expectations. I really appreciated their positive attitude and would recommend them to others. Thanks for a great experience!"
Mike R on October 2022
PLS Finishing LLC is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business.
"James and his crew were very conscious and worked hard to do a great job. Their price was competitive and the quality of their work was above my expectations. I really appreciated their positive attitude and would recommend them to others. Thanks for a great experience!"
We are committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business.
"I was told by another company that they no longer serviced the pellet stove that I had. I thought it was gonna have to buy a new one. So I called American heating and cooling and refrigeration. They came out less than a week. Had to order the part and came back and installed it. Aaron did an awesome job. It was thorough. He explained things to me and I was very happy with the service that I got. I will be using them if I need service again. Very friendly and professional and knowledgeable."
Janeice D on September 2025
We are committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business.
"I was told by another company that they no longer serviced the pellet stove that I had. I thought it was gonna have to buy a new one. So I called American heating and cooling and refrigeration. They came out less than a week. Had to order the part and came back and installed it. Aaron did an awesome job. It was thorough. He explained things to me and I was very happy with the service that I got. I will be using them if I need service again. Very friendly and professional and knowledgeable."
I will provide superior customer service striving for 100% customer satisfaction. I focus on communicating with my customers through every stage of the project. Keeping customers at ease with transparency knowing their projects are completed correctly and affordably. Thank you for choosing me for your Services!
I will provide superior customer service striving for 100% customer satisfaction. I focus on communicating with my customers through every stage of the project. Keeping customers at ease with transparency knowing their projects are completed correctly and affordably. Thank you for choosing me for your Services!
Specialize in: Farm/Ranch Equipment maintenance and repair General Handyman Service Wood cutting Mechanics Plumbing Painting Repairing Installing items Appliance installation and repair Lawn care maintenance and repair Hauling Just about anything you can think of, I can do it.
Specialize in: Farm/Ranch Equipment maintenance and repair General Handyman Service Wood cutting Mechanics Plumbing Painting Repairing Installing items Appliance installation and repair Lawn care maintenance and repair Hauling Just about anything you can think of, I can do it.
I have been a painter and handyman since 2014 Great attention to detail, I believe in getting the job done right the first time, and I take extreme pride in my work, and having a happy comstomer!
I have been a painter and handyman since 2014 Great attention to detail, I believe in getting the job done right the first time, and I take extreme pride in my work, and having a happy comstomer!
I provide my customers with honest based repairs and services that will lead to a more satisfying result that they will make them feel glad they chose me to help them out.
I provide my customers with honest based repairs and services that will lead to a more satisfying result that they will make them feel glad they chose me to help them out.
The average cost to hire a handyman ranges from about $40 to $140 per hour. Average project cost ranges between $180 and $700, but the cost per hour and per project depends heavily on the type, size, and complexity of the project. The pro’s experience level and your location also factor into how much a handyman charges per hour or per project. You can also expect to pay higher rates or additional fees for emergency services, or around periods of high customer demand, like holidays.
The cost of a gas grill burner ranges from $10 to $100 or more, depending on the brand. If you’re replacing one burner, consider replacing all the burners simultaneously. Although it will cost more upfront, it will save you the hassle of replacing a burner every few months, and your grill will cook more evenly and efficiently.
If your grill is relatively new or under warranty, it’s worth fixing. If the warranty has run out, find the cost of parts (usually a burner or grate that’s rusted out). If the parts cost more than half the price of a new grill, it’s worth buying a new one.
However, if your gas grill is a built-in unit as part of an outdoor kitchen, contact the grill manufacturer or distributor to check on warranty coverage. You should also contact a local gas grill repair technician to get an estimate for repairs or a price to replace your built-in grill.
Yes, you should hire a handyman who’s licensed, certified, and insured, if possible. States have different requirements for handyman licensing, registration, and certifications. If licensing is required in your area, you may pay more for a licensed handyman with experience than one who is not licensed or certified, but you’re likely to get a better end result for your project. Be sure to check our state licensing tool to review the local handymen guidelines.
On average, a gas grill can last from five to 15 years. Most grill manufacturers offer an extended warranty, varying in coverage and terms. You can help extend the life of your grill by cleaning it inside and out to remove food, grease, and carbon deposits. Protect your gas grill from the elements with a grill cover to prevent it from rusting, lessening the frequency of repairs.
The Clinton, MT homeowners’ guide to grill assembly services
From average costs to expert advice, get all the answers you need to get your job done.
Handyperson prices vary widely since they work on so many different jobs. Using this guide, you’ll get a better understanding of why the cost of a handyperson changes based on the job, size of the project, and where you live.
What does a handyperson do? Learn about common tasks and why you should hire a handyperson for your interior and exterior updates, repairs, and maintenance.