Get matched with top plumbers in Chester, MT

Q: What temperature will pipes freeze in a mobile home?

• <div><p>If the outside temperature drops below 20 degrees Fahrenheit, it will take around six hours for your pipes to freeze&mdash;and they might even burst. That&rsquo;s why keeping your mobile home&rsquo;s temperature around 50 to 60 degrees Fahrenheit is necessary, even if you&rsquo;re leaving it vacant for the winter. In addition, having ample skirting around the mobile home's underbelly will help keep pipes insulated during the winter. </p></div>

Q: How do you know if there is plumbing behind a wall?

• <div><p>You can use a stud finder or wall scanner to detect plumbing behind a wall. A stud finder can help detect metal plumbing pipes. Or, you can use a wall scanner, a special tool that many pros use to detect pipes when water is running. Make sure a faucet is on nearby to get the water flowing before you fire up the wall scanner.</p></div>

Q: Can I unclog my own drains?

• <div><p>It&rsquo;s possible to <a href="https://www.angi.com/articles/how-to-snake-a-drain.htm">snake minor drain clogs</a> yourself, provided they sit within a foot or two of the drain itself, but it&rsquo;s usually best to hire a professional plumber regardless. Even experienced DIYers have a high chance of accidentally pushing the clog further into the drain using a drain snake or another tool, so hiring a plumber is the ideal course of action. A professional plumber can use camera equipment to locate and identify the clog, and remove the entire blockage to fix your issue permanently.</p></div>

Q: What is the difference between a back pressure valve and a backflow preventer?

• <div><p>A back pressure valve is a control valve used on production vessels, such as separators, treaters, and free water knockouts. The valve holds pressure until a set point is reached, and then releases upstream pressure to reset. Back pressure valves are not safety mechanisms. Instead, they are regulators designed to keep the fluid, gas, or liquid mixture in a system at a certain pressure level to prevent bursts and other incidents.</p><p>Meanwhile, a backflow preventer is a safety mechanism that kicks in when the pressure has already failed and contaminated water flows in the reverse direction. Most backflow preventers consist of two one-way valves, or check valves assembled together. This design only allows water to pass through in one direction but not the other.</p></div>

Q: How long can you leave a leaking shower?

• <div><p>Fix your leaking shower ASAP. By the time you realize your shower is leaking, chances are it&rsquo;s been leaking for a while. Consider how often you use the shower to determine how much water has passed through the leak. Because <a href="https://www.angi.com/articles/shower-leaking-here-s-how-track-it-down.htm">shower leaks</a> don&rsquo;t fix themselves or get better with time, leaving them unchecked can lead to more damage and higher repair expenses. Use temporary fixes, but you should aim to have a professional repair your shower immediately.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your plumbing project in Chester, MT?

Select your specific project to find the pro for you.

Verified Reviews for Plumbing pros in Chester, MT

*The Angi rating for Plumbing companies in Chester, MT is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Plumbing needs.

*The HomeAdvisor rating for Plumbing companies in Chester, MT is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Plumbing needs.

Last update on July 14, 2023

Reviewed in July 2023
Trust Haven Solutions has done a wonderful job for me. Michael has been knowledgeable and very helpful for me. I would recommend this company for help with any computer problems you have.
Trust Haven Solution, Inc.
Request a quote
Reviewed in June 2023
Did a great job explaining the problems and fixing them. Received an accurate estimate before the work was done, and am completely satisfied with the results. Highly recommended!
Spartan Gutter Guards
Request a quote
Reviewed in April 2015
When I talked to Chris he was nice and honest. I was waiting to hear from them, but due to miscommunication when purchasing the deal I had to contact them. Upon contacting them regarding the deal I found out that they were never notified. In the mean time I found a different deal.
CSI Secure Solutions
Request a quote
Reviewed in January 2014
It took a long time to get scheduled but once done then showed up on time and finished as promised.
CONAN HEATING AND AIR CONDITIONING
Request a quote
Reviewed in September 2012
They don't bid jobs. The work by the hour which is a good deal because they don't take breaks that you have to pay for and they are fast. They ended up almost half the price of a bid from another contractor.
S & M CONSTRUCTION
Request a quote

Find Plumbers in Chester

Your Home Improvement Company, LLC

3.7(

157

)

Bathtub Install or ReplaceShower Install or Replace

Serving Chester, MT and surrounding areas

Approved

In business since 2004

Free estimates

Credit card accepted

Our mission to our customers is the continuous improvement of our ability to meet their needs and exceed their expectations at every opportunity. Our mission to our employees is to provide a work environment that treats you fairly, with respect and dignity, thereby allowing you to give your best effort to your work. Accomplishing our mission will allow us to be a successful company, staffed with successful individuals, conduction business with happy and loyal customers.

Recommended by88%of homeowners

Request Quote

Bath Fitter of Montana

3.9(

)

Shower Install or ReplaceBathtub Install or Replace

Serving Chester, MT and surrounding areas

Approved

In business since 2010

Credit card accepted

Offers commercial services

Bath Fitter, offers top quality, customized, bathroom renovation products and service, and can complete the entire installation in one day!\n\nWe provide more than just bathtub liners and bath surrounds. With more than 25 years of experience, we tailor each acrylic bathtub and shower to fit your specific bathroom. We also have a wide range of accessories including shower doors to complete your bathroom design. You get a comprehensive solution that goes beyond quick bathtub resurfacing fixes. Since measurements are taken in advance, and manufacturing is completed at our facility, we are able to install the entire one-piece seamless shower or bathtub enclosure in just one day, without compromising on quality, and you?ll get a lifetime warranty, too.\n\nExplore our bath remodeling, shower remodeling, and tub-to-shower conversion services and see why a Bath Fitter, bathroom makes all the difference.\n

150 neighbors recently requested a quote

Recommended by83%of homeowners

Request Quote

Neli Virtual Appliance Repair

4.2(

673

)

Refrigeration System - Install or ReplaceRefrigeration System - Install or Replace - For BusinessRefrigeration System - Repair or Service+1 more

Serving Chester, MT and surrounding areas

Approved

In business since 2016

Free estimates

Warranties offered

"Saved me a good amount of money. Very knowledgeable and patient. Fixed leak and drain pump"

Response time1 day

Recommended by87%of homeowners

Request Quote

Your Home Improvement Company, LLC

New to Angi

Bathtub Install or ReplaceShower Install or ReplaceWalk In Tub - Install or Replace

Serving Chester, MT and surrounding areas

Approved

In business since 2004

Free estimates

Credit card accepted

Request Quote

Lemer Plumbing and Heating LLC

5.0(

)

Bathtub Install or ReplaceBathtub Install or Replace - For BusinessDrain Clog or Blockage - Clear+9 more

Serving Chester, MT and surrounding areas

In business since 2012

Free estimates

Offers commercial services

Response time1 day

Recommended by100%of homeowners

Drain Clog or Blockage - ClearDrain Clog or Blockage - Clear - For BusinessDrain Line Breakage - Camera Locate+21 more

Serving Chester, MT and surrounding areas

In business since 2008

Emergency services offered

Credit card accepted

"Very professional. Jeromy wore a mask. He was polite and cleaned up the area after the install. I have a Choice Home Warranty and called them for the plumbing repairs. All i had to pay was a contractor service fee. In the future if i need a plumber i will ask for the Company OSP Plumbing in the Henderson/ Las Vegas Nevada area and ask for Jeromy."

Recommended by81%of homeowners

Request Quote

Quality Plumbing Services, PLLC

5.0(

)

Bathtub Install or ReplaceBathtub Install or Replace - For BusinessDrain Clog or Blockage - Clear+25 more

Serving Chester, MT and surrounding areas

In business since 2009

Free estimates

Rob Heavilin of Quality Plumbing Services, PLLC can help you with all of your plumbing needs, from simple clogs to new tubs and showers to water mains. All with friendly professional service.

Recommended by100%of homeowners

Bathtub Install or ReplaceBathtub Install or Replace - For BusinessShower Install or Replace+2 more

Serving Chester, MT and surrounding areas

In business since 2006

Credit card accepted

Homemade Design (HMD) is America's leading online interior design service that provides a dedicated interior designer to work closely with you, to design and decorate your home for one extremely affordable fixed fee per room based on services required. \nWorking with your HMD interior designer is like having an interior designer best friend who evaluates your existing space, studies images of rooms you love, understands your budget constraints and explores the functional considerations that fit your lifestyle. HMD is the only flat-fee virtual consulting service that allows collaboration at multiple points in the process with our client. We help our clients navigate the design process by breaking it down into a linear process. First we analyze their likes and dislikes in terms of style and color, navigate budget vs. quality challenges and analyze the function of the room. Next we help you choose the major pieces in the room that will determine style and the overall color palette, and then we specify products and sources that fit within those parameters.\nThe design process is not universal to every design firm (or TV show.) Please call or email – we’d love to chat about your project and how we anticipate working with you to create your dream home!

California Client Saves with HMD Designer Discounts

Recommended by54%of homeowners

Request Quote

Jill Seidner Interior Design

3.5(

)

Bathtub Install or ReplaceBathtub Install or Replace - For BusinessShower Install or Replace+2 more

Serving Chester, MT and surrounding areas

In business since 2006

Credit card accepted

Interior Designer specializing in commercial and residential interior design, design consultations, & online design services for anyone, anywhere.

Recommended by55%of homeowners

Request Quote

American Home Shield – Home Warranty

3.5(

5,688

)

Drain Clog or Blockage - ClearDrain Clog or Blockage - Clear - For BusinessDrain Line Breakage - Camera Locate+25 more

Serving Chester, MT and surrounding areas

In business since 1971

Credit card accepted

"I contacted American Home Shield online. They followed up with contact info about the assigned plumber who promptly called to schedule an appointment. The plumber was on time, professional and made the needed repairs."

Recommended by65%of homeowners

Request Quote

Showing 1-10 of 15

Plumbing questions, answered by experts

If the outside temperature drops below 20 degrees Fahrenheit, it will take around six hours for your pipes to freeze—and they might even burst. That’s why keeping your mobile home’s temperature around 50 to 60 degrees Fahrenheit is necessary, even if you’re leaving it vacant for the winter. In addition, having ample skirting around the mobile home's underbelly will help keep pipes insulated during the winter.

You can use a stud finder or wall scanner to detect plumbing behind a wall. A stud finder can help detect metal plumbing pipes. Or, you can use a wall scanner, a special tool that many pros use to detect pipes when water is running. Make sure a faucet is on nearby to get the water flowing before you fire up the wall scanner.

It’s possible to snake minor drain clogs yourself, provided they sit within a foot or two of the drain itself, but it’s usually best to hire a professional plumber regardless. Even experienced DIYers have a high chance of accidentally pushing the clog further into the drain using a drain snake or another tool, so hiring a plumber is the ideal course of action. A professional plumber can use camera equipment to locate and identify the clog, and remove the entire blockage to fix your issue permanently.

A back pressure valve is a control valve used on production vessels, such as separators, treaters, and free water knockouts. The valve holds pressure until a set point is reached, and then releases upstream pressure to reset. Back pressure valves are not safety mechanisms. Instead, they are regulators designed to keep the fluid, gas, or liquid mixture in a system at a certain pressure level to prevent bursts and other incidents.

Meanwhile, a backflow preventer is a safety mechanism that kicks in when the pressure has already failed and contaminated water flows in the reverse direction. Most backflow preventers consist of two one-way valves, or check valves assembled together. This design only allows water to pass through in one direction but not the other.

Fix your leaking shower ASAP. By the time you realize your shower is leaking, chances are it’s been leaking for a while. Consider how often you use the shower to determine how much water has passed through the leak. Because shower leaks don’t fix themselves or get better with time, leaving them unchecked can lead to more damage and higher repair expenses. Use temporary fixes, but you should aim to have a professional repair your shower immediately.

The Chester, MT homeowners’ guide to plumbing services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Stephanie Mickelson
•
Mar 17, 2026Mar 17, 2026
How Much Does Plumbing Repair Cost? [2026 Data]
The costs for common plumbing issues are determined based on parts, labor, and expertise level. Read our guide to find out how much you should budget.
Mariel Loveland
•
Oct 7, 2026Oct 7, 2026
How Much Does Rerouting a Plumbing Vent Cost? [2026 Data]
Wondering how much it costs to reroute plumbing? We have the information you need to learn about plumbing vent pipes and cost considerations when installing them.
Dan Simms
•
Sep 22, 2026Sep 22, 2026
How Much Will Rough-In Plumbing Cost for My Bathroom? [2026 Data]
Looking to estimate the cost of rough-in plumbing for your new home? We’ve got you covered with a guide that covers the different cost factors for this type of job.
Jouviane Alexandre
•
Jul 8, 2026Jul 8, 2026
How to Create a Great Residential Plumbing System Design
Need to create a residential plumbing design layout but don’t know where to start? Learn essential plumbing components to create the perfect layout for your home.
Audrey Bruno
•
Aug 1, 2026Aug 1, 2026
9 Plumbing Tips for Your New Home Construction
When you’re building your dream home, the plumbing is pivotal. Learn the elements that make up plumbing for new construction with our helpful tips.
Matt Marandola
•
Jul 9, 2026Jul 9, 2026
Plumbing Terms You Should Know as a Homeowner
There are a few plumbing terms that everyone needs to know. Using this informative guide, you’ll learn plumbing terms like flapper and shut-off valve to help you tackle both emergencies and everyday annoyances.