Get matched with top mulch and topsoil pros in Webb, MS

A base layer is typically required when installing artificial grass, and the specific materials depend on the surface where the turf is being placed.

If you are installing artificial grass over soil, you should lay down a sub-base and a weed barrier.

• Weed Barrier: A fabric weed barrier, weed membrane, or geo-textile paper is essential to prevent weeds from growing through and damaging the turf.

• Sub-base: This layer provides drainage, support, and prevents the turf from sinking. Common materials include a mixture of gravel and sand, such as crushed miscellaneous base (CMB), decomposed granite, decomposed limestone, or a specifically mixed road base. Other options include silica sand and granite sand.

If you are placing turf over a hard surface like concrete, you can often skip the sub-base and use a padded underlayment or shock-absorbent material like astro-cushion for comfort and safety.

If you are unsure which materials are best for your specific project, it's a good idea to consult with an artificial turf installer.

Generally, it is not necessary to remove old mulch before applying a new layer. As organic mulch breaks down, it enriches the soil with nutrients. However, you should remove the old layer if it shows signs of fungus or disease, which can be common in moist areas, or if the total depth is already too thick. Avoid letting the total mulch depth exceed 3 inches, as this can harm plant roots. If you do remove old, disease-free mulch, it can be added to a compost pile.

A 50-pound bag of pea gravel equals approximately one-half of a cubic foot. That amount will cover a three-square-foot area to a depth of about two inches. A three-square-foot area with equal-length sides is approximately 1.73 feet by 1.73 feet, or about 20.75 inches on each side.

If you are xeriscaping a lawn from scratch, your best bet for preparing the lawn is to work with a xeriscaping specialist in your area. The most common first step to making the transformation, however, will be to remove the turfgrass from your lawn. The subsequent steps will often include amending the soil to support new plants and installing low-drip or drip irrigation systems.