Get matched with top door pros in Thaxton, MS

You will need to cut or break a boomstick so it is wider than the door and long enough to anchor outside the door frame. Extend the broomstick horizontally under the doorknob, ensuring it's snug. Now using long screws and a drill, anchor the broomstick to the wall outside the door frame. Remember that you won't be able to open the door afterward. Do not proceed with this hack if your home has no alternative exit.

The proper height for a gate latch is between 34 and 48 inches above the ground. This height will not only be comfortable for you and your family to use, but it’ll also ensure that your latch complies with the International Building Code.

Sometimes one-way latches are installed very high on the gate to make it easier to open, although it’s only easier for tall people. Installing a two-way latch at the proper height is a good idea.

Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.

There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.

Many doors can be cut to size, but it depends on the door material. Solid wood doors are relatively easy to trim to a specific size, while hollow core and metal doors are trickier and can usually only be shaved down a little before you risk damaging them. If your door needs a lot of adjustment, it's best to order a custom size or have a pro do the resizing to make sure it holds up over time.